I shot the pointy Noe bullet today. Comes out at 160 grains , lubed gas checked.
60 yards , h110, .3107 water dropped. 1.1" with a 1x red dot. 5 shots.
NOE 247 HP mold for 300 blackout
Moderators: gds, bakerjw, Dolomite_Supafly
-
- Senior Silent Operator
- Posts: 146
- Joined: Mon Nov 28, 2016 7:50 am
Re: NOE 247 HP mold for 300 blackout
Im starting out and am looking at getting the NOE 150 grain mold with no gas checks. When you say water dropping does that mean dropping the bullets in a bucket of water from the mold? Are sizing dies ever needed once they coe out of the mold? Thanks.Rooter pig wrote:I shot the pointy Noe bullet today. Comes out at 160 grains , lubed gas checked.
60 yards , h110, .3107 water dropped. 1.1" with a 1x red dot. 5 shots.
-
- Senior Silent Operator
- Posts: 146
- Joined: Mon Nov 28, 2016 7:50 am
Re: NOE 247 HP mold for 300 blackout
Yes sir , I drop them out of the mold into the water. I size them also.
- cornmastah
- Member
- Posts: 49
- Joined: Mon Jan 21, 2013 3:14 am
- Location: Utah
- Contact:
Re: NOE 247 HP mold for 300 blackout
The group buy (inventory run) has become active as of today. If you want one, sign up here: http://noebulletmolds.com/smf/index.php ... cseen.html
Al said he will throw it into the schedule to run them as soon as there are 5 people signed up. I believe this will fill up super fast, so if you want one, go throw your name on the list (plus you get a discount when they are made).
Al said he will throw it into the schedule to run them as soon as there are 5 people signed up. I believe this will fill up super fast, so if you want one, go throw your name on the list (plus you get a discount when they are made).
- bangbangping
- Silent But Deadly
- Posts: 2695
- Joined: Sun Sep 15, 2013 6:34 pm
- Location: Texas Gulf Coast
Re: NOE 247 HP mold for 300 blackout
Did anyone talk to him about modifying the pin design?cornmastah wrote:The group buy (inventory run) has become active as of today. If you want one, sign up here: http://noebulletmolds.com/smf/index.php ... cseen.html
Al said he will throw it into the schedule to run them as soon as there are 5 people signed up. I believe this will fill up super fast, so if you want one, go throw your name on the list (plus you get a discount when they are made).
Re: NOE 247 HP mold for 300 blackout
I asked today in the active thread on NOE. I showed the link to your results and told him the measurements. Hopefully they will take notice
-
- Senior Silent Operator
- Posts: 146
- Joined: Mon Nov 28, 2016 7:50 am
Re: NOE 247 HP mold for 300 blackout
Bangbangping... I emailed him two weeks ago, about the better style pins, but got no response.
Re: NOE 247 HP mold for 300 blackout
I PM'D him today. We will see
- cornmastah
- Member
- Posts: 49
- Joined: Mon Jan 21, 2013 3:14 am
- Location: Utah
- Contact:
Re: NOE 247 HP mold for 300 blackout
If enough people ask him about it, I would think that he might even do a small run of those modified pins for those who already have the mold? Not sure how much he would charge for them, but it would be worth asking.
Who is online
Users browsing this forum: No registered users and 45 guests