PSA 16'' Hammer-Forged, Chrome-Lined, 300 AAC barrel
Price as configured: $279.95
16" Barrel Length
Hammer-Forged Machine Gun Steel Barrel
Extra Thick Chrome Lined Bore
1 in 8" Twist
High Pressure Tested
Magnetic particle Inspected
.750" Gas block Diameter
Carbine Gas Length
M4 Feedramps
Details
This barrel is made of a proprietary blend of Hammer forged chrome molly vanadium made by FN that is referred to as "Machine Gun Steel" by virtue of its use in FN's M249 and M240 weapons. The hammer forging process work hardens the steel, making it more durable. In addition, the chrome process for the bore allows for a lining almost twice as thick as a standard M16 for enhanced durability. Chambered in 300 AAC, with a 1/8 twist, M4 barrel extension, and a carbine-length gas system. The barrel has an M4A1 profile under the handguards for better heat management and is Mil-spec phosphate coated, High Pressure tested and Magnetic Particle inspected.
PSA 16'' Hammer-Forged, Chrome-Lined, 300 AAC Barrel
Moderators: gds, PalmettoStateArmory
- PalmettoStateArmory
- Silent Operator
- Posts: 55
- Joined: Mon Feb 13, 2012 1:15 pm
PSA 16'' Hammer-Forged, Chrome-Lined, 300 AAC Barrel
Palmetto State Armory
200 Business Park Blvd
Columbia, SC 29203
Web Sales: 803.788.9095
General Inquiries: 803.240.2347
[email protected]
200 Business Park Blvd
Columbia, SC 29203
Web Sales: 803.788.9095
General Inquiries: 803.240.2347
[email protected]
- L1A1Rocker
- Silent But Deadly
- Posts: 1201
- Joined: Wed Feb 21, 2007 7:40 pm
- Location: Texas Hill Country
Re: PSA 16'' Hammer-Forged, Chrome-Lined, 300 AAC Barrel
Do you have them with the gas port in the pistol location?
- PalmettoStateArmory
- Silent Operator
- Posts: 55
- Joined: Mon Feb 13, 2012 1:15 pm
Re: PSA 16'' Hammer-Forged, Chrome-Lined, 300 AAC Barrel
No, these 16'' barrels are only offered in carbine gas.L1A1Rocker wrote:Do you have them with the gas port in the pistol location?
Palmetto State Armory
200 Business Park Blvd
Columbia, SC 29203
Web Sales: 803.788.9095
General Inquiries: 803.240.2347
[email protected]
200 Business Park Blvd
Columbia, SC 29203
Web Sales: 803.788.9095
General Inquiries: 803.240.2347
[email protected]
Re: PSA 16'' Hammer-Forged, Chrome-Lined, 300 AAC Barrel
This is great news I was hoping PSA would get in to 300AAC Blackout, I will be ordering one very soon.
All the best...Bob.
All the best...Bob.
Re: PSA 16'' Hammer-Forged, Chrome-Lined, 300 AAC Barrel
is the barrel dimpled for a gas block set screw?
- PalmettoStateArmory
- Silent Operator
- Posts: 55
- Joined: Mon Feb 13, 2012 1:15 pm
Re: PSA 16'' Hammer-Forged, Chrome-Lined, 300 AAC Barrel
No, the barrels are not dimpled.
Palmetto State Armory
200 Business Park Blvd
Columbia, SC 29203
Web Sales: 803.788.9095
General Inquiries: 803.240.2347
[email protected]
200 Business Park Blvd
Columbia, SC 29203
Web Sales: 803.788.9095
General Inquiries: 803.240.2347
[email protected]
Re: PSA 16'' Hammer-Forged, Chrome-Lined, 300 AAC Barrel
Centurion Arms has offered this type of hammer-forged barrel for a few years now. I have one in 5.56 NATO and its very accurate and cleans-up well with that thick chrome lining.
Is "Machine Gun Steel" the opposite of "Mild Steel"?
Is "Machine Gun Steel" the opposite of "Mild Steel"?
"The Road Goes On Forever and the Party Never Ends" The Highwaymen
Re: PSA 16'' Hammer-Forged, Chrome-Lined, 300 AAC Barrel
received mine friday, got it checked out by a gunsmith today. it is improperly headspaced
- L1A1Rocker
- Silent But Deadly
- Posts: 1201
- Joined: Wed Feb 21, 2007 7:40 pm
- Location: Texas Hill Country
Re: PSA 16'' Hammer-Forged, Chrome-Lined, 300 AAC Barrel
Hummm, too tight or too loose? I wonder if I should invest in a set of guages. I ordered a PSA kit last week. . .bani wrote:received mine friday, got it checked out by a gunsmith today. it is improperly headspaced
Edit: Have you contacted PSA on this yet? If so what did they say?
Re: PSA 16'' Hammer-Forged, Chrome-Lined, 300 AAC Barrel
chamber is much too loose. only found out saturday afternoon, after PSA was closed. i will try to contact them monday, i guess i get to find out how PSA's customer service is.
everyone building a rifle should have gauges. i have 5.56 gauges, still trying to find someone with 300blk gauges in stock.
everyone building a rifle should have gauges. i have 5.56 gauges, still trying to find someone with 300blk gauges in stock.
Who is online
Users browsing this forum: No registered users and 16 guests