300BO
Brass has been fully processed as follows:
* Decap
* Swage primer pocket to remove crimp
* Full length size
* Trim to nominal 1.358” +/-.010
* Expand neck with .30 cal mandrel
* Wet tumbled with Brass Juice
* Roll Sized
Case dimensions are spot checked with Wilson case gauge. Primer pockets and neck tension's are also spot checked with gauges.
1.358 0.004+/- trim to length
Here is some photos of the brass its SHINY.
https://imgur.com/gallery/BJS5SXx
$70 per 500
You cover shipping, using Pirate ship to keep it low. Typically 8-9$
Converted 300BO from 556LC
Moderators: gds, bakerjw, renegade, tba02
Re: Converted 300BO from 556LC
Any smaller quantities?
-
- Member
- Posts: 24
- Joined: Mon Jan 23, 2017 9:23 pm
Re: Converted 300BO from 556LC
How many do you have available?
-
- New Member
- Posts: 9
- Joined: Wed Jan 15, 2020 2:06 pm
Re: Converted 300BO from 556LC
Still got plenty of LC.
Re: Converted 300BO from 556LC
Looking for 1K 300 BO. Got any?
Re: Converted 300BO from 556LC
Are you still selling the 300lc brass
Re: Converted 300BO from 556LC
I'd be interested in some brass if you still have some too.
Re: Converted 300BO from 556LC
I’d be interested also
- plant.one
- Silent But Deadly
- Posts: 6823
- Joined: Tue Jun 23, 2009 8:31 pm
- Location: Oakland County, MI
Re: Converted 300BO from 556LC
ya'll realize the OP post was a year ago right?
Reloading info shared is based on experiences w/ my guns. Be safe and work up your loads from published data. Web data may not be accurate/safe.
This disclaimer will self destruct in 10 seconds.
This disclaimer will self destruct in 10 seconds.
Who is online
Users browsing this forum: No registered users and 186 guests