16" cmmg 300 blkout barrel
Moderators: gds, bakerjw, renegade
16" cmmg 300 blkout barrel
This barrel has a carbine length gas tube. I can't find a reload to function the action. I'm using 220 gr. Berry bullets. I've tried A1680 9.5 to 10.5 grs. I just got a can of CFE Black. I also have Shooter's World Blackout. Any suggestions. P.S. new to suppressed reloading.
Re: 16" cmmg 300 blkout barrel
What buffer and spring are you using?
Depending on some other factors, 10.5 of 1680 is on the low end of what I would expect to function.
What was the velocity?
Depending on some other factors, 10.5 of 1680 is on the low end of what I would expect to function.
What was the velocity?
300 Blackout, not just for sub-sonics.
Re: 16" cmmg 300 blkout barrel
Thanks for the response. The spring and buffer are standard for the carbine. Not sure about the velocity. I thought about replacing the spring and buffer. Any suggestions?
- plant.one
- Silent But Deadly
- Posts: 6823
- Joined: Tue Jun 23, 2009 8:31 pm
- Location: Oakland County, MI
Re: 16" cmmg 300 blkout barrel
if its a standard spring and a 3oz carbine buffer - something else is wrong
i'd start with checking for a misaligned gas block, or a gas leak somewhere first.
i'd start with checking for a misaligned gas block, or a gas leak somewhere first.
Reloading info shared is based on experiences w/ my guns. Be safe and work up your loads from published data. Web data may not be accurate/safe.
This disclaimer will self destruct in 10 seconds.
This disclaimer will self destruct in 10 seconds.
Re: 16" cmmg 300 blkout barrel
Thanks. I'll check it out today.
Who is online
Users browsing this forum: No registered users and 60 guests