SDN-6 not budging from MPW
Moderators: gds, bakerjw, renegade
SDN-6 not budging from MPW
Took out my 9" MPW with SDN-6 a week ago and after about 200 rounds of subs and a couple of mags of supers (all factory, mostly Remington) the can refuses to budge from the mount. The ratchet lock can be depressed, but can does not move. Any tricks to getting this off again?
Re: SDN-6 not budging from MPW
I've had mine become difficult to remove before but never completely stuck. Best I can say is squirt something inside where the mount meets the can. Breakfree, penetrating oil, or even break cleaner then work it loose by trying to tighten and loosen. After you get it off clean the mount and inside the can where it attaches real good. I do this regulary now and haven't had an issue since.
-
- Silent But Deadly
- Posts: 248
- Joined: Fri Jun 14, 2013 8:16 am
- Location: Upstate SC
Re: SDN-6 not budging from MPW
PB Blaster will loosen it up.
Re: SDN-6 not budging from MPW
thanks, that's what I presumed - good to know there aren't any other special tricks.
Re: SDN-6 not budging from MPW
Strap wrench if you need to go there.
Get some nickel anti seize and put a light coating over the threads of the flash hider when you get it off and it won't happen again.
Get some nickel anti seize and put a light coating over the threads of the flash hider when you get it off and it won't happen again.
Who is online
Users browsing this forum: No registered users and 26 guests