Form 1 Mag Light Questions

Moderators: gds, bakerjw, renegade

BulletFactory
Silent Operator
Posts: 80
Joined: Sun Jan 07, 2018 9:03 pm

Form 1 Mag Light Questions

Post by BulletFactory »

I started filling out the Form 1 for a Mag Light suppressor, and ran into a couple questions that could cause a delay. I was hoping someone who has a legal mag light suppressor could help me fill in the blanks.

4a. Origonal manufacturer. Im guessing, None. ?
4b. Silencer, not suppressor, correct?
4c. .30
4d. Model ... ?
Length
4e. of barrel. ...N/A. ?
4f. Overall. 7”
BulletFactory
Silent Operator
Posts: 80
Joined: Sun Jan 07, 2018 9:03 pm

Re: Form 1 Mag Light Questions

Post by BulletFactory »

Do I need a responsible persons questionaire for an individual?
I have a trust, but it took too long for approval on the sbr. I will transfer to the trust in the future, but individual should be faster.
Boolit_Head
Silent But Deadly
Posts: 349
Joined: Tue Aug 23, 2016 7:15 pm

Re: Form 1 Mag Light Questions

Post by Boolit_Head »

BulletFactory wrote:I started filling out the Form 1 for a Mag Light suppressor, and ran into a couple questions that could cause a delay. I was hoping someone who has a legal mag light suppressor could help me fill in the blanks.

4a. Origonal manufacturer. Im guessing, None. ?
4b. Silencer, not suppressor, correct?
4c. .30
4d. Model ... ?
Length
4e. of barrel. ...N/A. ?
4f. Overall. 7”
I Efiled my form 1 under a trust before the baloon went up and everything changed. Not a maglight but a form 1 supressor. The manufacturer was the trust. Yes I used Silencer. Mine was a 30 cal but it depends on what you are building it for. I'd use the "caliber of hole" it was intended for an not a chambering like .308. Model on mine was none. Length on mine was blank. Barrel on my form was blank. Overall length is the finished length of the supressor.

Can't help you one the second post but there is a lot of form 1 info on supressor talk and some how to's to be found with Google searches.
remanaz
Member
Posts: 13
Joined: Wed Mar 29, 2017 1:29 am

Re: Form 1 Mag Light Questions

Post by remanaz »

4a put your name and city state as it will be engraved on your suppressor (note the instructions show to put maker infor if creating a NFA item)
4b yes silencer
4c .30 is what I put
4d if you are going to engrave a model name on the suppressor then enter that name here otherwise put n/a.
4e I left that blank
4f yes put in your total length or even a little extra just incase


here are the instructions from the ATF form itself
Description of Firearm and Markings. (1) Item 4a. If you are modifying an
existing firearm, enter the name and location of the original manufacturer.
If you are creating the firearm, enter the maker’s name, city and state.
(2) Item 4b. The types of NFA firearms are listed in the definitions; (3) Item
4c. Specify one caliber or gauge. If there is another designation, indicate
the designation in item 4h. (4) Item 4d. Show the model designation (if
known). (5) Item 4e and 4f. Specify one barrel length and overall length in
items 4e and 4f as applicable. Note: if the firearm has a folding or
collapsible stock, the overall measurement is to be made with the stock
extended. (6) Item 4g. Do not alter or modify the serial number of an
existing firearm . Enter the existing serial number or, if a new firearm, one
you create. (7) Markings: The maker is required to mark the firearm with
his or her name, city and state. All markings are to be in compliance with
27 CFR 478.92 and 479.102.
Last edited by remanaz on Wed May 02, 2018 12:11 am, edited 1 time in total.
remanaz
Member
Posts: 13
Joined: Wed Mar 29, 2017 1:29 am

Re: Form 1 Mag Light Questions

Post by remanaz »

BulletFactory wrote:Do I need a responsible persons questionaire for an individual?
I have a trust, but it took too long for approval on the sbr. I will transfer to the trust in the future, but individual should be faster.
If I am not mistaken you will have to pay another $200 to do this.
Boolit_Head
Silent But Deadly
Posts: 349
Joined: Tue Aug 23, 2016 7:15 pm

Re: Form 1 Mag Light Questions

Post by Boolit_Head »

remanaz wrote:4a should be left blank since there is no original manufacturer or importer.
4b yes silencer
4c .30 is what I put
4d if you are going to engrave a model name on the suppressor then enter that name here otherwise put n/a.
4e I left that blank
4f yes put in your total length or even a little extra just incase
In filling out 4a on the form 1 you are the original manufacturer.
remanaz
Member
Posts: 13
Joined: Wed Mar 29, 2017 1:29 am

Re: Form 1 Mag Light Questions

Post by remanaz »

Boolit_Head wrote:
remanaz wrote:4a should be left blank since there is no original manufacturer or importer.
4b yes silencer
4c .30 is what I put
4d if you are going to engrave a model name on the suppressor then enter that name here otherwise put n/a.
4e I left that blank
4f yes put in your total length or even a little extra just incase
In filling out 4a on the form 1 you are the original manufacturer.
I corrected my post. But you are the maker not the manufacturer as defined by the ATF.
hardcase
Silent But Deadly
Posts: 1020
Joined: Thu Jul 04, 2013 9:07 pm

Re: Form 1 Mag Light Questions

Post by hardcase »

The following was several years ago:

I was a little surprised at how helpful ATF was with one of my applications. She actually called me to verify a change. It was one of those somantics type things where she could have just sent it back but called me and changed my form over the phone. They have a lot of my money. Maybe I got the good customer treetment :P .

It's been several years ago. They could have changed their attitude.
BulletFactory
Silent Operator
Posts: 80
Joined: Sun Jan 07, 2018 9:03 pm

Re: Form 1 Mag Light Questions

Post by BulletFactory »

remanaz wrote:
BulletFactory wrote:Do I need a responsible persons questionaire for an individual?
I have a trust, but it took too long for approval on the sbr. I will transfer to the trust in the future, but individual should be faster.
If I am not mistaken you will have to pay another $200 to do this.
Yes I will have to pay twice.
User avatar
plant.one
Silent But Deadly
Posts: 6823
Joined: Tue Jun 23, 2009 8:31 pm
Location: Oakland County, MI

Re: Form 1 Mag Light Questions

Post by plant.one »

if your trust was approved, post 41F, you wont need to submit any of the extra paperwork - unless the responsible persons list has changed anyway.

fingerprints, passport photo's, etc - as i understand them - are valid for two years on file after approval of previous NFA item.

a quick call to the BATFE can/will be able to confirm that for you.
Reloading info shared is based on experiences w/ my guns. Be safe and work up your loads from published data. Web data may not be accurate/safe.
This disclaimer will self destruct in 10 seconds.
Post Reply

Who is online

Users browsing this forum: No registered users and 47 guests