Powders For the 300 blk. Links to published Data added.
Moderators: gds, bakerjw, renegade, bamachem
- gds
- Silent But Deadly
- Posts: 3711
- Joined: Thu Nov 01, 2012 9:43 am
- Location: Sandhills of North Carolina
Re: Powders For the 300 blk. Links to published Data added.
new link added for updated Accurate powders, added LT30 for subs
Yes, I am a Baptist, and yes I carry a gun. You might think I carry a gun because I don't trust God. Well you would be wrong. I have complete faith in my Lord. It is mankind I have no trust in
Re: Powders For the 300 blk. Links to published Data added.
Which powder works well for subsonic and is cleanest or is there such a thing?
-
- Silent But Deadly
- Posts: 182
- Joined: Mon Jan 10, 2011 8:49 pm
Re: Powders For the 300 blk. Links to published Data added.
hodgdon 4198 is my go to for heavy subs.aaholland wrote:Which powder works well for subsonic and is cleanest or is there such a thing?
NRA Life Member
- cwlongshot
- Silent But Deadly
- Posts: 1128
- Joined: Sat Oct 18, 2014 7:53 pm
- Location: Connecticut
Re: Powders For the 300 blk. Links to published Data added.
I know this is posted, but took some time to find yesterday.. so here it is again.
CW
A Bolt, Single Shot and a few M$Rs
Join me on RUMBLE! Https://rumble.com/user/cwlongshot
https://youtube.com/channel/UCBOIIvlk30qD5a7xVLfmyfw
I PROUDLY SUPPORT LAW ENFORCEMENT & OUR TROOPS
Join me on RUMBLE! Https://rumble.com/user/cwlongshot
https://youtube.com/channel/UCBOIIvlk30qD5a7xVLfmyfw
I PROUDLY SUPPORT LAW ENFORCEMENT & OUR TROOPS
Re: Powders For the 300 blk. Links to published Data added.
Hey all new to the blackout world but been doing shooting for a while under real time conditions and ballistics effects. I have a question concerning handload of 300 with reman'd LC brass running IMR4227,WSR, and hornady SST 125gr #3019 for coyote. I have looked up ridiculous amounts of info on this but seen both sides. Anyone in particular ever used this combo starting with 16.5 gn to 16.8gn? Second is 147gn cannelure FMJ milspec 308 using same confiuration? Platform one is great lakes upper with yankee hill 16" 1:8 twist heavy barrel with yankee hill slant brake and carbine length gas impingement with yankee hill gas block.Platform 2 is Ruger mini 14 for 300AAC non modified. I have seen alot discussed but have a huge COAL value and all cases trimmed according to wilson 300aac case headspace gauge. Any help that cou;d be provided to narrow down what I have found would be awesome.
- cwlongshot
- Silent But Deadly
- Posts: 1128
- Joined: Sat Oct 18, 2014 7:53 pm
- Location: Connecticut
Re: Powders For the 300 blk. Links to published Data added.
I have tried 4227 early on and altho I have some super accurate loadings with middle weight bullets. I have mostly moved to other powders. Mostly because of the speed attainable.
if its what you must use you should be able to find some good loads. But they will not reach top attainable velocities.
Let the fun begin, good luck!
cw
if its what you must use you should be able to find some good loads. But they will not reach top attainable velocities.
Let the fun begin, good luck!
cw
A Bolt, Single Shot and a few M$Rs
Join me on RUMBLE! Https://rumble.com/user/cwlongshot
https://youtube.com/channel/UCBOIIvlk30qD5a7xVLfmyfw
I PROUDLY SUPPORT LAW ENFORCEMENT & OUR TROOPS
Join me on RUMBLE! Https://rumble.com/user/cwlongshot
https://youtube.com/channel/UCBOIIvlk30qD5a7xVLfmyfw
I PROUDLY SUPPORT LAW ENFORCEMENT & OUR TROOPS
Re: Powders For the 300 blk. Links to published Data added.
Isnt it amazing how much Ed Harris uses Bulleye on everything and gets by with it????
Hunting ,fishing and trapping in Missouri
Re: Powders For the 300 blk. Links to published Data added.
AS a newbie to the 300blackout I have a lot of questions about sub load and supersonic loads
h110 has always said not to decrease load more then 3% and seen several loads listed as much as 12% reduced?
shooting 16" heavy ar15 threaded for can, figured two uppers cheaper then two rifles
enlighten my mind plz
h110 has always said not to decrease load more then 3% and seen several loads listed as much as 12% reduced?
shooting 16" heavy ar15 threaded for can, figured two uppers cheaper then two rifles
enlighten my mind plz
Re: Powders For the 300 blk. Links to published Data added.
Is there any info for vv n310? Wanted to try some with 168gr bullet but not sure where to start. Was thinking 5gr and work down from there but don't really want to be guessing with a powder like that.
- cwlongshot
- Silent But Deadly
- Posts: 1128
- Joined: Sat Oct 18, 2014 7:53 pm
- Location: Connecticut
Re: Powders For the 300 blk. Links to published Data added.
Do you have or have you tried A1680?GUNNY14 wrote:AS a newbie to the 300blackout I have a lot of questions about sub load and supersonic loads
h110 has always said not to decrease load more then 3% and seen several loads listed as much as 12% reduced?
shooting 16" heavy ar15 threaded for can, figured two uppers cheaper then two rifles
enlighten my mind plz
CW
A Bolt, Single Shot and a few M$Rs
Join me on RUMBLE! Https://rumble.com/user/cwlongshot
https://youtube.com/channel/UCBOIIvlk30qD5a7xVLfmyfw
I PROUDLY SUPPORT LAW ENFORCEMENT & OUR TROOPS
Join me on RUMBLE! Https://rumble.com/user/cwlongshot
https://youtube.com/channel/UCBOIIvlk30qD5a7xVLfmyfw
I PROUDLY SUPPORT LAW ENFORCEMENT & OUR TROOPS
Who is online
Users browsing this forum: Semrush [Bot] and 166 guests