I just bought 500 of these. They are Spire point, made for 300 Blackout and I'm going to use them for subsonic loads.
I emailed the company for load data and to my surprise, they said they don't have any. They suggested that I look for 220 grain spire point 'lead' bullet load data and use that.
I don't have a lot of reference resources. I use Hodgdon and my Speer handbook. Neither references any load data of this type.
Anyone have a resource or suggestion on where to start?
I've been powder coating my own 230 grain Spire Point cast bullets and have a good load using CFE BLK. If nothing else, I guess I'll start there.
Thanks.
Load Data for 220 Grain, 300 BLK, Blue Bullets
Moderators: gds, bakerjw, renegade, bamachem
-
- New Member
- Posts: 5
- Joined: Sun Apr 10, 2022 9:21 am
Re: Load Data for 220 Grain, 300 BLK, Blue Bullets
If you have the internet you have lots of sources. Just do a 'net search.
OR, as you stated you could use your existing load data for the 230 grain bullet and adjust it.
OR, as you stated you could use your existing load data for the 230 grain bullet and adjust it.
Re: Load Data for 220 Grain, 300 BLK, Blue Bullets
I like this reference since you can filter by powder and/or bullet weight
https://shootersreference.com/reloading ... -blackout/
When I did my subs I used the Speer site since I had Speer bullets. 200gr spitzer sp with 11.2gr 5744 did well. Bolt gun though, so no idea if it would cycle semi...
https://shootersreference.com/reloading ... -blackout/
When I did my subs I used the Speer site since I had Speer bullets. 200gr spitzer sp with 11.2gr 5744 did well. Bolt gun though, so no idea if it would cycle semi...
Who is online
Users browsing this forum: Amazon [Bot], Bing [Bot] and 90 guests