Vectan Powders Experimentation.

Moderators: gds, bakerjw, renegade, bamachem

Post Reply
User avatar
gilgsn
New Member
Posts: 2
Joined: Mon Sep 19, 2022 6:06 am
Location: France
Contact:

Vectan Powders Experimentation.

Post by gilgsn »

Hello.

New to the 300 Blackout and living in France, I will be posting my results using Vectan powders on this thread..
So far:

Barrel: 10.5" Starline brass. Light crimp.

Bullet: Hornady V-MAX 110gr. OAL 53mm. SP3 19gr: 2067fps (factory: 2221fps).
Bullet: PPU 139gr. OAL 54mm. SP3 18.5gr: 1939fps.
Bullet: Hornady Interlock 180gr. OAL 56.5mm. Ba9 7gr: Not enough to cycle (AR), no reading.
I was looking for a subsonic load for the Interlock bullets...

Next I might try Ba6.5 for subsonic loads..

Gil.
lordkain1
New Member
Posts: 3
Joined: Fri Jun 11, 2021 9:44 am

Re: Vectan Powders Experimentation.

Post by lordkain1 »

Salut! Hello!

Me too I m living in France and reloading 300 blk with Vectan powders , especially SP3 .
I think SP3 is the best for sub or super in Vectan brand

I own a ddm4 pdw in 10.3

And load 110grs with same oal as you and 1.15 grams of sp3 speed :2100fps
190 subx hornady 0.63 grams of sp3 1050fps
123grs lapua fmj 1 gram of sp3 speed 1900fps
200grs lapua 0.63 grams of sp3 speed 1050 fps

All loads cycle perfectly with my suppressor ase762dual
Post Reply

Who is online

Users browsing this forum: Amazon [Bot], Bing [Bot] and 146 guests