I’m looking for load data for Winchester 748

Moderators: gds, bakerjw, renegade, bamachem

Post Reply
Cmmatijevich
New Member
Posts: 1
Joined: Thu Oct 28, 2021 6:10 am

I’m looking for load data for Winchester 748

Post by Cmmatijevich »

Hey guys I’m about to finish up my build and I have a lot of win 748 and I’d like to use a few other powders I have an abundance would be Ramshot Tac and Win 231 if anyone can help even just for a starting point I’d appreciate it it using 150 gr pojectiles.
User avatar
BobinNC
Silent But Deadly
Posts: 193
Joined: Thu Aug 16, 2012 2:35 am
Location: Goldsboro, NC
Contact:

Re: I’m looking for load data for Winchester 748

Post by BobinNC »

And your not going to find load data for the 300 Blackout for Win 748 or TAC as they are way to slow burning for the small 300 Blackout case.

Win 231 on the other hand is way too fast burning.

I suggest you stick to powders actually recommended and tested for the 300 Blackout and 150 grain projectiles, such as:

Hodgdon CFE BLK
Hodgdon H110
Hodgdon Lil'Gun
Hodgdon Trail Boss
IMR 4227
Winchester 296
Accurate 1680
Accurate 4100
Accurate 5744
Accurate No. 11FS
Ramshot Enforcer
Alliant 300 MP
Last edited by BobinNC on Fri Oct 29, 2021 2:01 pm, edited 1 time in total.
TRshootem
Silent But Deadly
Posts: 264
Joined: Fri Dec 26, 2014 1:13 am
Location: Montana

Re: I’m looking for load data for Winchester 748

Post by TRshootem »

A little bit of google foo or other queries to educate yourself on the proper propellants suited would have been instructive. So much good info, including data in published form such as Hodgdon.
Post Reply

Who is online

Users browsing this forum: No registered users and 97 guests