Sup y'all, ShippWrekk here. I'm a new reloader, I've been working diligently at growing my knowledge during the past year and have finally achieved great results in this cast boolit. I'm shooting through a mid-length 16" PSA AR, nickel boron BCG, H-1 buffer. 10.9gr of CFE BLK, @ 2.090" OAL. I use the RCBS small base/ar-series sizer, lee universal expander, RCBS seater, and Lee factory taper-crimp. So far, good results out of the following brass: AP, GFL, Hornady, LC, FC, and RP. .011" - .013" neck thickness; .326" - .330" neck size varied between manufacturer, and max case length of 1.360". Check me out on the tubes.
1 post •Page 1 of 1