Does anyone have any Lil Gun loads for 300 Ham"R ?
Thanks
Skidder
300 Ham'R loading Data
Moderators: gds, bakerjw, renegade, bamachem
- BobinNC
- Silent But Deadly
- Posts: 193
- Joined: Thu Aug 16, 2012 2:35 am
- Location: Goldsboro, NC
- Contact:
Re: 300 Ham'R loading Data
I know that this is not answering your question, but Bill Wilson himself posted this on AR15.com few weeks ago:
https://www.ar15.com/forums/AR-15/300-H ... 21-761597/
Some real good information in this thread above, from Bill himself. He mentions Lil'Gun as using it can get you into over pressure quickly if not careful.
In this thread:At this point there is nothing better than CFEBLK/WC680 for 125-150gr loads available to either the commercial or OEM markets.
We use WC680 (CFEBLK in 45# kegs) for all but our 95-110gr loads, we use SBR SOCOM for 95gr and some of the 110gr loads at the ammo company. You simply run out of usable powder capacity before you even get to 50,000psi with the 95gr and some 110gr loads. You can't get enough powder in the case and seat the bullet to 2.255" to reach max pressure with CFEBLK with any 95-110gr bullet. As an example a Hornady 110gr SP over 29.9gr of CFEBLK (hot lot #2) is only 52,000psi at 2742fps and shoots great. However we can't load that commercially due to power spill when the machine is indexing. CAUTION: You can easily go over pressure with SBR SOCOM loading 110gr or heavier bullets!!!
https://www.ar15.com/forums/AR-15/300-H ... 21-761597/
Some real good information in this thread above, from Bill himself. He mentions Lil'Gun as using it can get you into over pressure quickly if not careful.
Who is online
Users browsing this forum: Bing [Bot] and 289 guests