help me pic a 300 blk pistol barrel

Moderators:gds, bakerjw, renegade

BCOWANWHEELS
Member
Posts:37
Joined:Wed Dec 17, 2014 12:11 am
help me pic a 300 blk pistol barrel

Post by BCOWANWHEELS » Sat Aug 08, 2015 10:24 pm

all this is so confuseing. would someone help me pic a mfg,barrel length , gas system and twist rate for a 300 blk pistol barrel ? I have 0 experience with 300blk and ar pistols. I plan on shooting suppressed and non-suppressed super sonic rounds also. my budget is low to middle of the road. thanks so much.
bob
I BELIEVE IN "JOHN 3:16" FOR ALMOST 50 YRS NOW. NEVER REGRETTED A SECOND OF IT !

BulletFlight for Android
User avatar
RAINS
Silent But Deadly
Posts:542
Joined:Mon Sep 30, 2013 6:18 pm

Re: help me pic a 300 blk pistol barrel

Post by RAINS » Sun Aug 09, 2015 1:02 am

A 9' pistol-length gas tube barrel is what you want. They seem to work best with subs/supers suppressed or not. You can get a few extra FPS (super sonic) out of a 10'-12.5ish' barrel or a little more compact with a 8' barrel. Still 9' seems to be the way to go. As far as brands I hear good things about AAC's 9's barrels. I'm sure folks with other brand barrels will chime in and help you out. For the record my little pdw pistol .300blk sports an 8' CMMG barrel and runs great subs/supers with no can. I get less mussel blast and flash than a 18' .223!


R

BCOWANWHEELS
Member
Posts:37
Joined:Wed Dec 17, 2014 12:11 am

Re: help me pic a 300 blk pistol barrel

Post by BCOWANWHEELS » Sun Aug 09, 2015 1:05 am

thanks appreciated
I BELIEVE IN "JOHN 3:16" FOR ALMOST 50 YRS NOW. NEVER REGRETTED A SECOND OF IT !

User avatar
BadKarmaZeroSix
Silent But Deadly
Posts:2024
Joined:Sun Jan 05, 2014 3:11 pm
Location:NW Missouri

Re: help me pic a 300 blk pistol barrel

Post by BadKarmaZeroSix » Sun Aug 09, 2015 2:18 am

9" pistol gas with 1:7 twist...several mfgs are good...i have an AAC and a KAK Mr. Blonde...like em both...
"Of course I'm carrying a gun. It's where I keep my bullets".

BCOWANWHEELS
Member
Posts:37
Joined:Wed Dec 17, 2014 12:11 am

Re: help me pic a 300 blk pistol barrel

Post by BCOWANWHEELS » Sun Aug 09, 2015 5:00 am

well been net shopping all evening and heres what I bought. no it isn't top shelf but neither is my wallet. I got Anderson rifles parts which have lifetime guarantee !

10.5 barrel,1/8 twist,parkerized,300 blk,pistol gas- $90.00 (If it don't run I can always cut it down to 8-9 " )
milspec 6 position buffer tube kit minus stock- $27.00 ( I,ll mill off the 6 position part or deal with it in other ways to be legal )
pistol gas tube - $8.50
total delivered was $137.10

hope I didn't mess up,i figured with a lifetime warranty if it doesn't run they,ll make it right. I looked at sota also but they have a bunch of bad reviews so I got scared. now for a floating front end, smith vortex flash hider, sights, magpul afg.

I,ll post up a review when it all gets here.
THANKS SO MUCH FOR ALL OF YOU FOLKS HELP.
I BELIEVE IN "JOHN 3:16" FOR ALMOST 50 YRS NOW. NEVER REGRETTED A SECOND OF IT !

User avatar
Sithlord
Silent But Deadly
Posts:861
Joined:Sun Jan 05, 2014 12:50 pm
Location:Northern Virginia

Re: help me pic a 300 blk pistol barrel

Post by Sithlord » Sun Aug 09, 2015 7:35 am

BCOWANWHEELS wrote:well been net shopping all evening and heres what I bought. no it isn't top shelf but neither is my wallet. I got Anderson rifles parts which have lifetime guarantee !

milspec 6 position buffer tube kit minus stock- $27.00 ( I,ll mill off the 6 position part or deal with it in other ways to be legal )
The easier way to deal with it is to purchase a pistol buffer tube, IMHO... KAK industries has them starting at $20 or so...

User avatar
Badfinger
Silent But Deadly
Posts:194
Joined:Mon Sep 03, 2012 5:24 pm
Location:S/W Ohio

Re: help me pic a 300 blk pistol barrel

Post by Badfinger » Sun Aug 09, 2015 4:39 pm

+1 KAK Mr. Blonde

BCOWANWHEELS
Member
Posts:37
Joined:Wed Dec 17, 2014 12:11 am

Re: help me pic a 300 blk pistol barrel

Post by BCOWANWHEELS » Sun Aug 09, 2015 10:40 pm

do you fellas run a krink style break on your 300 blk pistols
I BELIEVE IN "JOHN 3:16" FOR ALMOST 50 YRS NOW. NEVER REGRETTED A SECOND OF IT !

User avatar
BadKarmaZeroSix
Silent But Deadly
Posts:2024
Joined:Sun Jan 05, 2014 3:11 pm
Location:NW Missouri

Re: help me pic a 300 blk pistol barrel

Post by BadKarmaZeroSix » Mon Aug 10, 2015 2:21 am

I don't because i have a QD suppressor, and use muzzle-devices that work with the suppressor...
"Of course I'm carrying a gun. It's where I keep my bullets".

BCOWANWHEELS
Member
Posts:37
Joined:Wed Dec 17, 2014 12:11 am

Re: help me pic a 300 blk pistol barrel

Post by BCOWANWHEELS » Mon Aug 10, 2015 2:51 am

I just bought the mas (krink style) muzzle brake. it was 41.00 delivered. its the lightest on the market. hope I didn't mess up again.............
I BELIEVE IN "JOHN 3:16" FOR ALMOST 50 YRS NOW. NEVER REGRETTED A SECOND OF IT !

Post Reply