ar15 pistol ejects but doesn't lock open or load

Discussion about rifles in 300 AAC BLACKOUT (7.62x35mm), hosted by the creator of the cartridge.

Moderators: gds, bakerjw, renegade

Post Reply
JoshInPNW
New Member
Posts: 3
Joined: Fri Jan 07, 2022 6:07 pm

ar15 pistol ejects but doesn't lock open or load

Post by JoshInPNW »

I am running an H2 buffer on a piston driven AR15.
I read a few threads that said "get an H2 buffer" - but I am already running an H2 buffer.
The gas block is set correctly (distance from shoulder)
Ejects empty cases, but won't strip a round off the magazine. It doesn't lock open on "last round" either.
I read some posts about making the gas port bigger (on barrel); but this came with caveats about doing it, I'm willing to drill it out, but don't want to just blindly drill anything.

My gas block is an adjustable one, but it is set to 100% right now (yes, I tried lower settings).

Ideas ?

Thanks
ReadyAimDuck
Silent But Deadly
Posts: 174
Joined: Tue Jul 14, 2020 11:08 am

Re: ar15 pistol ejects but doesn't lock open or load

Post by ReadyAimDuck »

First, what are you using for ammo? Subs, or supers? Factory loads?

When the bolt doesn't lock back on an empty magazine, you're likely not getting enough gas pressure to push the mass of the BCG, buffer, and overcome the force of the spring. So, you would want to try a lighter buffer at that point. Not a heavier buffer like an H2. Do you have a carbine buffer you can swap in?
User avatar
gds
Silent But Deadly
Posts: 3711
Joined: Thu Nov 01, 2012 9:43 am
Location: Sandhills of North Carolina

Re: ar15 pistol ejects but doesn't lock open or load

Post by gds »

Piston driven has its own set of problems.

Not enough information.
Type of ammo, like readyaimduck said would be helpful.
Barrel length
gas port location, ie. pistol, carbine, midlength, rifle.
suppressed/unsuppressed

Most answers I would have would be directly related to typical direct impingement. Just a guess, but i think I would try a standard buffer before I did anything else.
Yes, I am a Baptist, and yes I carry a gun. You might think I carry a gun because I don't trust God. Well you would be wrong. I have complete faith in my Lord. It is mankind I have no trust in
JoshInPNW
New Member
Posts: 3
Joined: Fri Jan 07, 2022 6:07 pm

Re: ar15 pistol ejects but doesn't lock open or load

Post by JoshInPNW »

Thanks!

Shooting some 125g sig saurer super
barrell is 10.5"
pistol length gas system

I'll give a standard weight a try when I get a break in the rain.
popper
Silent But Deadly
Posts: 407
Joined: Tue Apr 15, 2014 2:09 pm

Re: ar15 pistol ejects but doesn't lock open or load

Post by popper »

using a pistol length spring? Some are too long/strong.
JoshInPNW
New Member
Posts: 3
Joined: Fri Jan 07, 2022 6:07 pm

Re: ar15 pistol ejects but doesn't lock open or load

Post by JoshInPNW »

No, standard spring...
popper
Silent But Deadly
Posts: 407
Joined: Tue Apr 15, 2014 2:09 pm

Re: ar15 pistol ejects but doesn't lock open or load

Post by popper »

Should lock back easily with empty mag, pulling the handle. If it doesn't go back all the way, spring is too long. GKs 308 had that problem. Seems like the piston run gets dirty rod/port and some blocks have a can/normal setting.
Post Reply

Who is online

Users browsing this forum: No registered users and 132 guests