Forming cases from 223

Discussion about rifles in 300 AAC BLACKOUT (7.62x35mm), hosted by the creator of the cartridge.

Moderators: gds, bakerjw, renegade

Post Reply
84o4Doc
New Member
Posts: 1
Joined: Sat Sep 18, 2021 12:11 am

Forming cases from 223

Post by 84o4Doc »

What head stamps show the best brass for making 300AAC from .223 / 556
Saxon
Silent Operator
Posts: 53
Joined: Thu Dec 20, 2018 2:28 am
Location: Springfield Oregon

Re: Forming cases from 223

Post by Saxon »

in the hand loading section
viewtopic.php?f=141&t=88599
EDL
New Member
Posts: 4
Joined: Mon Oct 04, 2021 12:10 pm

Re: Forming cases from 223

Post by EDL »

There is the list, but so far I've converted quite a few different brands of brass and have yet to run into any don't work because the neck walls are too thick. I do have a Hornady neck turning tool, so if I ever do run into that, I can just turn the necks down as needed.
Post Reply

Who is online

Users browsing this forum: No registered users and 57 guests