Search found 42 matches
- Sun Mar 22, 2020 11:03 am
- Forum: Handloading
- Topic: Feeding problems Dillon case feeder.
- Replies: 6
- Views: 1692
Re: Feeding problems Dillon case feeder.
I went to the large pistol plate with a drop-in spacer and it works like a champ now.
- Fri Mar 20, 2020 12:34 pm
- Forum: Handloading
- Topic: Feeding problems Dillon case feeder.
- Replies: 6
- Views: 1692
Re: Feeding problems Dillon case feeder.
My collator has the fixed metal part.
- Wed Mar 18, 2020 12:00 pm
- Forum: Handloading
- Topic: Feeding problems Dillon case feeder.
- Replies: 6
- Views: 1692
Feeding problems Dillon case feeder.
I have an older Dillon collator. The directions say to use the small pistol plate with the two washers under it. I have it set up that way. The problem is it's not picking up cases. It can take more than 3 minutes to fill the tube. I tried the small rifle plate but it was feeding brass in upside dow...
- Mon Mar 09, 2020 6:06 pm
- Forum: Casting
- Topic: Sub sonic bullet molds
- Replies: 4
- Views: 13226
Re: Sub sonic bullet molds
I have the Lee mold. The bullets drop undersized. I used powder coat on them and barely had any resistance to a .310 sizing bushing from NOE.
I also picked up the MP 235 gr and the MP 311-410 clone.
I also picked up the MP 235 gr and the MP 311-410 clone.
- Thu Mar 05, 2020 11:15 am
- Forum: Handloading
- Topic: Crimped primer pockets...
- Replies: 7
- Views: 3843
Re: Crimped primer pockets...
I'll get some pics. I deprimed all that brass yesterday.
- Thu Mar 05, 2020 11:12 am
- Forum: Casting
- Topic: Perfect 300 BO Cast Boolit
- Replies: 30
- Views: 30001
Re: Perfect 300 BO Cast Boolit
The MP 311-140 is an awesome boolit. It casts a 140 gr solid and a 123 gr deep hollow point.
- Wed Mar 04, 2020 7:12 pm
- Forum: Handloading
- Topic: Crimped primer pockets...
- Replies: 7
- Views: 3843
Re: Crimped primer pockets...
I'm sure they are crimped. You can see the crimp ring and a primer won't go into the pocket.
- Wed Mar 04, 2020 12:38 pm
- Forum: Handloading
- Topic: Crimped primer pockets...
- Replies: 7
- Views: 3843
Crimped primer pockets...
I picked up 1500 pieces of once fired mixed 300 BLK brass. I found out that the Hornady, Federal, and CBC all have crimped primer pockets. That makes using the Dillon 650 to load a real pain. Now I have to deprime and swage the brass. I'm not going to sort it, just mass process it. I was really hopi...
- Thu Feb 20, 2020 1:53 pm
- Forum: General Ammo Discussion
- Topic: PSA FEDARM BULK AMMO DANGEROUS
- Replies: 20
- Views: 18712
Re: PSA FEDARM BULK AMMO DANGEROUS
I only put about maybe 10 rounds though my gun before I realized there were primer blowouts. The very next round caused the jam. I quit using them. I read the warnings but even still I wouldn’t expect them to be this bad. One would expect they are just covering their butt legally if something happe...
- Thu Feb 20, 2020 1:48 pm
- Forum: Casting
- Topic: I can't wait!
- Replies: 3
- Views: 5399
Re: I can't wait!
I'll get some pictures posted. They look awesome!