They posted a withdrawal letter. I figure they'll be back.
https://www.atf.gov/firearms/docs/gener ... f/download
Search found 7 matches
- Thu Dec 24, 2020 2:07 am
- Forum: General Gun Talk
- Topic: BATFE going after braces - its offical
- Replies: 4
- Views: 4017
- Mon Dec 14, 2020 1:03 am
- Forum: Handloading
- Topic: Any load data for 217gr with H110, 4227, CFE BLK ,and Lil'Gun?
- Replies: 6
- Views: 2473
Re: Any load data for 217gr with H110, 4227, and Lil'Gun?
Any loads with the other powders? I don't have much 4227. Sounds good. I want to work my way up. I found some more data in the Sierra Reloading phone app. IMR 4227 (Careful) Low Pressure 9.0 - 9.1 gr Starting point: 9.2 gr (Careful) High Pressure: 12.6 gr Do you think I'd be okay starting out at 9.2...
- Sun Dec 13, 2020 8:15 pm
- Forum: Handloading
- Topic: Any load data for 217gr with H110, 4227, CFE BLK ,and Lil'Gun?
- Replies: 6
- Views: 2473
Any load data for 217gr with H110, 4227, CFE BLK ,and Lil'Gun?
A while back I bought some 217gr Gallant bullets that are sized to .310. Anyone know of any load data that would work for Hodgdon H110, IMR-4227, CFE BLK, or Lil'Gun? I've never reloaded subsonic before. I just want to make some rounds for the range. I've dug around and the only thing I can find is ...
- Thu Nov 26, 2020 4:57 pm
- Forum: Handloading
- Topic: Uneven crimp in primer pocket?
- Replies: 4
- Views: 1305
Re: Uneven crimp in primer pocket?
Thanks, I'll check that out. Do you think any problems could occur from the 3 I primed?
- Thu Nov 26, 2020 3:02 pm
- Forum: Handloading
- Topic: Uneven crimp in primer pocket?
- Replies: 4
- Views: 1305
Uneven crimp in primer pocket?
I recently purchased the RCBS Pocket Swager tool to remove military crimps from brass. The tool seems to work well. But I noticed the crimp in my brass looks kind of funny. The top 3 pieces are brass that I swaged and reprimed. The bottom 2 are pieces that have been swaged. The crimp on the edge of ...
- Mon Sep 14, 2020 6:30 pm
- Forum: Handloading
- Topic: Flattened primers with light loads?
- Replies: 3
- Views: 1264
Re: Flattened primers with light loads?
Thanks for the info.
I originally separated the brass into a case holder. But I accidentally flipped it upside down when I left the range.
I originally separated the brass into a case holder. But I accidentally flipped it upside down when I left the range.
- Sat Sep 12, 2020 6:03 pm
- Forum: Handloading
- Topic: Flattened primers with light loads?
- Replies: 3
- Views: 1264
Flattened primers with light loads?
I just started reloading 300 Blackout for my Aero Precision AR15 upper. Today I tested a few loads I made using Hornady A-Max 168 Gr and Nosler Varmageddon 110 Gr bullets. I'm using Hodgdon H110 powder. My primers seem to be pretty flat. Do you think this is something I should be concerned about? I'...