Search found 4 matches
- Tue Nov 27, 2012 4:35 am
- Forum: Handloading
- Topic: Noob reloading questions
- Replies: 3
- Views: 1162
Re: Noob reloading questions
Hey Zueslewis. I have been reloading 147 gr. Mil. Pulldown set to a COAL of 2.130 for my supersonics and have been running them at about 1950 fps with 16.5 gr. of H110 powder. You may have metering issues with your press as it is a really fine ball powder, but you can watch for that. As far as my su...
- Mon Nov 05, 2012 4:29 am
- Forum: Handloading
- Topic: BERGER 210 VLD
- Replies: 17
- Views: 8271
Re: BERGER 210 VLD
I have loaded some sub loads with the Berger 210 VLD Target and really like it. I opted to go with H4198 as my powder choice for the round and it functioned great. I'm running a 16" CMMG with a carbine tube. The load I found with the lowest extreme spread was 10.5gr pressed to 2.200". Aver...
- Mon Nov 05, 2012 3:54 am
- Forum: Handloading
- Topic: 147 grain FMJ Loads
- Replies: 51
- Views: 26097
Re: 147 grain FMJ Loads
I was out this weekend chronying and found what I think is a good load for both action of the gun and for accuracy. It may need to be tweaked for various rifles but I'm running a 16" CMMG with a carbine tube, and an altered mapul magazine so they lay straight in it. No other mods than that. The...
- Wed Oct 03, 2012 12:19 am
- Forum: Handloading
- Topic: Share your 300 Blackout Loads here>
- Replies: 445
- Views: 221729
Re: Share your 300 Blackout Loads here>
I'm running a CMMG 16" rifle with a carbine tube. I loaded and tested some of my own loads and found consistent success with cycling and speed. Brass: 300BLK Rem. factory Bullet: 147 gr. FMJBT - U.S. Pulldown Polished Primer: CCI 450 Magnum Powder: H110 at 16.0 gr. COAL: 2.140" No Crimp on...