300BlkTalk

There is a request started for the 311-247-FN RG4 cavity GC (Whisper) mold.
If there is some interest we could get some of these molds made.
http://noebulletmolds.com/smf/index.php ... 293.0.html
Sure hope we can get a few more on there.
Jim

Does that bullet work well in 300BO? Just looking at the drawing, it looks like it would have to be seated pretty deep to chamber. I've got an Ideal 311415 mold which has to be seated pretty deep before the nose prevents chambering.

Ken H>