Recommended Primer
Moderators: gds, bakerjw, renegade, bamachem
Recommended Primer
Is there a Primer officially recommended by AAC for supersonic loads?
Re: Recommended Primer
Not sure if there is an official primer, but CCI standard small rifles work just fine.
Re: Recommended Primer
The 300 BLK website says "Remington 7.5 primers" but any small rifle primer will work just fine. I use CCI small rifle primers
Re: Recommended Primer
Do Remmington 7.5 have the same scary primer dents when the bolt slams down on the round as the CCI-400's or is that just ARs regardless? Or civilian primers regardless...
Re: Recommended Primer
All AR's will do this due to a floating firing pin. You have 2 primers that I am aware of that are designed for semi autos. These have harder cups to prevent a slam fire. CCI #41's and Federal has a 205match AR primer. There are probably more than just these with the harder cups...
- randyrucker
- Silent But Deadly
- Posts: 2395
- Joined: Fri May 24, 2013 8:19 am
- Location: Georgia
Re: Recommended Primer
cci 41 is a good go to primer.
Re: Recommended Primer
CCI 41 are my first choice
Re: Recommended Primer
Yes CCI 41 or 450. I and others have had issues with the CCI 400 flatting out, even with low pressure subs. I used 400's and then went to the CCI 41 and the flat primer problem went away.
- imarangemaster
- Member
- Posts: 19
- Joined: Tue Oct 29, 2013 10:24 pm
- Location: Sierra Foothills, Nor-Cal
Re: Recommended Primer
i use the CCI #41s in my 5.56 and 300 BLK. Work awesome!
Who is online
Users browsing this forum: Bing [Bot], Google [Bot] and 44 guests