optimal 300 blackout barrel length

Discussion about rifles in 300 AAC BLACKOUT (7.62x35mm), hosted by the creator of the cartridge.

Moderators: gds, bakerjw, renegade

Post Reply
ar15fanboy
Silent Operator
Posts: 55
Joined: Wed Feb 16, 2011 3:50 pm

optimal 300 blackout barrel length

Post by ar15fanboy »

I was wondering what is the optimal barrel length for this cartridge? Since this cartridge uses HG powder which burn up very quickly, what is the optimal length for supersonic? at what barrel length does it stop giving higher velocities?
82nd airborne
Silent But Deadly
Posts: 772
Joined: Tue Nov 02, 2010 10:56 am
Contact:

Re: optimal 300 blackout barrel length

Post by 82nd airborne »

That all depends for what you want with it. Subsonic 240g is going to have alot different optimal length than a 110g super, which Im sure you already knew, but what type of projectile are we talking?
Regards,
Aaron Fouraker
Co-Owner
Delta Company Arms, LLC
(918) 332-6503
[email protected]
www.deltacompanyarms.com
IN GOD WE TRUST.
ar15fanboy
Silent Operator
Posts: 55
Joined: Wed Feb 16, 2011 3:50 pm

Re: optimal 300 blackout barrel length

Post by ar15fanboy »

sorry if this sounds dumb but what is optimal bullet weight for this cartridge for supersonic? I have a few of 168 grain that I hope to use with this cartridge. Could this weigh be used for deer or small game at 400 yards? It seems like I need to go lighter like 110-150 grain.
82nd airborne
Silent But Deadly
Posts: 772
Joined: Tue Nov 02, 2010 10:56 am
Contact:

Re: optimal 300 blackout barrel length

Post by 82nd airborne »

I like 130's because they are longer than 110's, which lets you get closer to the lands of the rifling for better accuracy, while still being light enough to get the velocities needed to make the bullet perform like a big game bullet. My BLK's have been shooting on both sides of 1MOA with 130's, about 2moa with 110's, sometimes a little worse, and the 150 to 180g bullets shoot very very well, when loaded out to full mag length, but they dont run fast enough to get optimal expansion for medium game sized targets.
Regards,
Aaron Fouraker
Co-Owner
Delta Company Arms, LLC
(918) 332-6503
[email protected]
www.deltacompanyarms.com
IN GOD WE TRUST.
User avatar
300Blk
Site Admin
Posts: 7331
Joined: Mon Apr 25, 2005 9:31 am
Location: USA

Re: optimal 300 blackout barrel length

Post by 300Blk »

It depends - optimal for what. About 125 is seeming to be the right neighborhood. I would not go above 155 for supersonic (except for 3-gun).
User avatar
Overton-AR
Silent But Deadly
Posts: 1191
Joined: Tue Nov 03, 2009 4:16 am

Re: optimal 300 blackout barrel length

Post by Overton-AR »

82nd airborne wrote:I like 130's because they are longer than 110's, which lets you get closer to the lands of the rifling for better accuracy, while still being light enough to get the velocities needed to make the bullet perform like a big game bullet. My BLK's have been shooting on both sides of 1MOA with 130's, about 2moa with 110's, sometimes a little worse, and the 150 to 180g bullets shoot very very well, when loaded out to full mag length, but they dont run fast enough to get optimal expansion for medium game sized targets.
What 130's are you using?? When I got into this little gun I fully intended it to be
for 100% sub sonic use. Now its turning out to be so fun, maybe I will be tempted
to try some supers. The 130's sounds about the right balance between velocity
and performance.
82nd airborne
Silent But Deadly
Posts: 772
Joined: Tue Nov 02, 2010 10:56 am
Contact:

Re: optimal 300 blackout barrel length

Post by 82nd airborne »

Hornady good sir.
Regards,
Aaron Fouraker
Co-Owner
Delta Company Arms, LLC
(918) 332-6503
[email protected]
www.deltacompanyarms.com
IN GOD WE TRUST.
User avatar
Overton-AR
Silent But Deadly
Posts: 1191
Joined: Tue Nov 03, 2009 4:16 am

Re: optimal 300 blackout barrel length

Post by Overton-AR »

82nd airborne wrote:Hornady good sir.
The Spire Points???
And how fast can you push it??
What barrel length??
User avatar
300Blk
Site Admin
Posts: 7331
Joined: Mon Apr 25, 2005 9:31 am
Location: USA

Re: optimal 300 blackout barrel length

Post by 300Blk »

Probably around 30-40 inches stops giving higher velocities.
Post Reply

Who is online

Users browsing this forum: No registered users and 70 guests