Vectan Powders Experimentation.
Posted: Mon Sep 19, 2022 8:45 am
Hello.
New to the 300 Blackout and living in France, I will be posting my results using Vectan powders on this thread..
So far:
Barrel: 10.5" Starline brass. Light crimp.
Bullet: Hornady V-MAX 110gr. OAL 53mm. SP3 19gr: 2067fps (factory: 2221fps).
Bullet: PPU 139gr. OAL 54mm. SP3 18.5gr: 1939fps.
Bullet: Hornady Interlock 180gr. OAL 56.5mm. Ba9 7gr: Not enough to cycle (AR), no reading.
I was looking for a subsonic load for the Interlock bullets...
Next I might try Ba6.5 for subsonic loads..
Gil.
New to the 300 Blackout and living in France, I will be posting my results using Vectan powders on this thread..
So far:
Barrel: 10.5" Starline brass. Light crimp.
Bullet: Hornady V-MAX 110gr. OAL 53mm. SP3 19gr: 2067fps (factory: 2221fps).
Bullet: PPU 139gr. OAL 54mm. SP3 18.5gr: 1939fps.
Bullet: Hornady Interlock 180gr. OAL 56.5mm. Ba9 7gr: Not enough to cycle (AR), no reading.
I was looking for a subsonic load for the Interlock bullets...
Next I might try Ba6.5 for subsonic loads..
Gil.