Moderators: gds , bakerjw , renegade
rengler22
Member
Posts: 11 Joined: Thu Nov 05, 2015 3:36 pm
Post
by rengler22 » Sun Jul 03, 2016 5:40 pm
TMD wrote: rengler22 wrote: Hey guys! Just had my bolt action rifle (Remington) put together and figured I'd share it with all of you...
Here are the details:
Remington 700 Action in 300 Blackout ($500)
Christensen Arms - Carbon Fiber Wrapped Gunsmith Barrel - Target Contour - 16" / 1/7 Twist - 5/8 x 24 Threaded ($795)
Christensen Arms - Summit Carbon Fiber Thumbhole Stock - Desert Digital ($750)
Christensen Arms - Accurize Action ($250)
Christensen Arms - Glass Bedded / Free Float Stock ($200)
Christensen Arms - Timney RH Trigger - 2.5 LB Trigger Pull (No charge for install but $120 for trigger)
Christensen Arms - Sako Extractor ($140)
Christensen Arms - Badger Ordnance - M5 DBM DETACHABLE MAGAZINE TRIGGERGUARD - SHORT ACTION (No charge)
Talley Lightweight Rings - Low (No charge for install but $35 for rings)
Not Pictured (But Purchased):
Swarovski Z3 3x9x36 ($779)
Harris Bipod ($116)
SilencerCo Omega ($1,1100)
Carbon Fiber Bolt Knob - Lumley ($40)
I'd post a picture of my Ruger RARR but after seeing yours it would be a meaningless post. Damn that's a sweet setup.
Nonsense! Please post away! The RARR is a darn fine rifle out of the box, and I always like a picture of someone's new toy!
And thanks a lot for the compliment! I'm pretty excited about it!
boelt63A
New Member
Posts: 5 Joined: Sun Oct 21, 2012 3:28 pm
Post
by boelt63A » Tue Aug 02, 2016 2:43 pm
rengler22 wrote: TMD wrote: rengler22 wrote: Hey guys! Just had my bolt action rifle (Remington) put together and figured I'd share it with all of you...
Here are the details:
Remington 700 Action in 300 Blackout ($500)
Christensen Arms - Carbon Fiber Wrapped Gunsmith Barrel - Target Contour - 16" / 1/7 Twist - 5/8 x 24 Threaded ($795)
Christensen Arms - Summit Carbon Fiber Thumbhole Stock - Desert Digital ($750)
Christensen Arms - Accurize Action ($250)
Christensen Arms - Glass Bedded / Free Float Stock ($200)
Christensen Arms - Timney RH Trigger - 2.5 LB Trigger Pull (No charge for install but $120 for trigger)
Christensen Arms - Sako Extractor ($140)
Christensen Arms - Badger Ordnance - M5 DBM DETACHABLE MAGAZINE TRIGGERGUARD - SHORT ACTION (No charge)
Talley Lightweight Rings - Low (No charge for install but $35 for rings)
Not Pictured (But Purchased):
Swarovski Z3 3x9x36 ($779)
Harris Bipod ($116)
SilencerCo Omega ($1,1100)
Carbon Fiber Bolt Knob - Lumley ($40)
I'd post a picture of my Ruger RARR but after seeing yours it would be a meaningless post. Damn that's a sweet setup.
Nonsense! Please post away! The RARR is a darn fine rifle out of the box, and I always like a picture of someone's new toy!
And thanks a lot for the compliment! I'm pretty excited about it!
Who did all the work for you? Christensen Arms?
rengler22
Member
Posts: 11 Joined: Thu Nov 05, 2015 3:36 pm
Post
by rengler22 » Wed Aug 03, 2016 12:23 am
Double post. Not sure how to delete.
Last edited by
rengler22 on Wed Aug 03, 2016 12:24 am, edited 1 time in total.
rengler22
Member
Posts: 11 Joined: Thu Nov 05, 2015 3:36 pm
Post
by rengler22 » Wed Aug 03, 2016 12:23 am
Who did all the work for you? Christensen Arms?
Yes. CA did all the work for me. Took them about 5 months from the time they received it from me.
boelt63A
New Member
Posts: 5 Joined: Sun Oct 21, 2012 3:28 pm
Post
by boelt63A » Wed Aug 10, 2016 9:49 pm
rengler22 wrote: Who did all the work for you? Christensen Arms?
Yes. CA did all the work for me. Took them about 5 months from the time they received it from me.
How does it shoot??
rengler22
Member
Posts: 11 Joined: Thu Nov 05, 2015 3:36 pm
Post
by rengler22 » Sun Aug 14, 2016 2:00 pm
boelt63A wrote: rengler22 wrote: Who did all the work for you? Christensen Arms?
Yes. CA did all the work for me. Took them about 5 months from the time they received it from me.
How does it shoot??
Much better than me!
CDKJudoka
New Member
Posts: 2 Joined: Fri Sep 30, 2016 7:59 pm
Post
by CDKJudoka » Fri Sep 30, 2016 8:43 pm
Just picked this up yesterday.
Ruger American Ranch Rifle in .300BLK, obviously.
AAC 7.62 Flash Hider
Nikon ProStaff 3x9 40
Paracord sling.
My buddy had an AAC can that is lying around his shop, so he slapped it on to see how the rifle handled. And also to show me that I need a can.
GTO Kroh
Senior Silent Operator
Posts: 128 Joined: Wed Jan 15, 2014 11:56 am
Post
by GTO Kroh » Tue Oct 25, 2016 9:44 pm
Remington 700. Magpul stock ATI x sight 2 HD all I can say is damn it's heavy.
0uTkAsT
Silent Operator
Posts: 92 Joined: Wed Oct 29, 2014 11:54 am
Post
by 0uTkAsT » Tue Nov 15, 2016 4:51 pm
I use my RARR as an ultralight hunting rifle... It is a very early production Compact model and weighs 6 lbs 7.4 oz as pictured, unloaded. I have reworked the trigger, removed the cheesy styrofoam block from the buttstock and filled with spray-in insulation foam (also used a small amount of insulation foam in the barrel channel of the forend to stiffen it without adding much weight), made a thin hard plastic butt plate to replace the tacky rubber factory one (further reduced LOP and doesn't "snag" my hunting jacket any more), removed the factory scope base and added Talley extra low ringmounts and a Leupold 2-7x SABR (which works beautifully with many 300 BLK loads), a Hornady Bolt Ball, a few spare magazines, and an Outdoor Connection web sling (weighs under 3oz with Brute swivels and is totally silent).
The rifle functions flawlessly and is more accurate than I am, so the only future upgrades I have planned are a Matthew's Fabrication cheek riser and possibly a Glades tactical bolt handle. The bolt ball works great, but due to the geometry of the factory handle it sits a little too close to the stock for my liking. Someday I also hope to have an Omega 9K to run on it, but a suppressor isn't in the budget right now.
Who is online
Users browsing this forum: No registered users and 18 guests