Discussion about rifles in 300 AAC BLACKOUT (7.62x35mm), hosted by the creator of the cartridge.
Moderators: gds , bakerjw , renegade
rb288
Senior Silent Operator
Posts: 141 Joined: Tue Jan 20, 2015 8:07 pmLocation: Grovertown, Indiana
Post
by rb288 Tue Jul 21, 2015 11:33 am
1. Hardened Arms 8.25 upper on DPMS registered lower
2. AAC 16" upper on PSA lower
3. Remington 700 sps tactical
All 300 blackout.
All fitted with Silencerco tri-fecta FH to accept my Specwar 762 suppressor.
I have 2 Omegas currently in ATF jail for another 2-3 months.
Trying to decide what to get next....lol.
I may have been on the losing side, but, I'm not convinced it was the wrong side.
velo555
Silent But Deadly
Posts: 391 Joined: Wed Mar 28, 2012 9:14 amLocation: Upstate SC
Post
by velo555 Fri Jul 31, 2015 2:13 pm
Swapped out for a shorter handgaurd. 11" Rainier Arms EVO rail to 9" Samson Mfg EVO rail.
Before
After
P.S. This thread should be a sticky!!!!
Victor Lopez
rb288
Senior Silent Operator
Posts: 141 Joined: Tue Jan 20, 2015 8:07 pmLocation: Grovertown, Indiana
Post
by rb288 Sat Aug 01, 2015 8:37 am
rb288 wrote:
1. Hardened Arms 8.25 upper on DPMS registered lower
2. AAC 16" upper on PSA lower
3. Remington 700 sps tactical
All 300 blackout.
All fitted with Silencerco tri-fecta FH to accept my Specwar 762 suppressor.
I have 2 Omegas currently in ATF jail for another 2-3 months.
Trying to decide what to get next....lol.
In response to several who have asked....
yes the bipod is mounted backwards, at least for how I want it.
My son took it out shooting and removed the bipod. When he put it back on, he installed it backwards.
I wasn't paying attention when I took the picture and only noticed after it got posted.
It is NOW on correctly, legs forward....kids....lol
I may have been on the losing side, but, I'm not convinced it was the wrong side.
trenttyre
Silent But Deadly
Posts: 202 Joined: Fri Mar 04, 2011 12:26 pm
Post
by trenttyre Sun Aug 02, 2015 12:01 pm
Texasgunner wrote: My 300 BLK SBR with the new Syrac Ordinance piston kit.
How did you get a piston kit to work with that buffer tube? I thought all those PDW buffer tubes used proprietary bolt carriers.
JohnSkiS
Member
Posts: 28 Joined: Sun Jul 14, 2013 1:09 amLocation: Sierra vista, Arizona
Post
by JohnSkiS Fri Aug 07, 2015 3:32 am
gr8testsantini wrote: crappy picture
You don't happen to have the details on this rifle, for those of us that are curious?
trenttyre
Silent But Deadly
Posts: 202 Joined: Fri Mar 04, 2011 12:26 pm
Post
by trenttyre Fri Aug 07, 2015 7:19 am
JohnSkiS wrote: gr8testsantini wrote: crappy picture
You don't happen to have the details on this rifle, for those of us that are curious?
It's a Robinson armament XCR-L with an acr stock adapter made by a member over at xcr forum.
certifiable
Silent But Deadly
Posts: 1766 Joined: Mon Nov 26, 2012 8:14 pmLocation: Kansas
Post
by certifiable Fri Aug 07, 2015 10:32 am
trenttyre wrote: Texasgunner wrote: My 300 BLK SBR with the new Syrac Ordinance piston kit.
How did you get a piston kit to work with that buffer tube? I thought all those PDW buffer tubes used proprietary bolt carriers.
the MVB ARC stock pictured uses any standard BCG, only the buffer is proprietary.
"America will never be destroyed from the outside.
aaron
Member
Posts: 31 Joined: Thu May 07, 2015 10:53 pm
Post
by aaron Sat Aug 08, 2015 3:01 pm
300 is finally finished. It only took around 3 years.
223 on top
300 SBR on bottom
Merlin593
Member
Posts: 31 Joined: Sat May 17, 2014 9:16 am
Post
by Merlin593 Mon Aug 10, 2015 10:37 am
here is my hunting rifle with a Kryptek Highlander cerakote job. Adcor defense lower, PA 1x6 300 ACSS scope, Custom tactical complete upper:
Who is online
Users browsing this forum: Google [Bot] and 81 guests
