208 A max and 210 berger vld moly
Moderators: gds, bakerjw, renegade, bamachem
208 A max and 210 berger vld moly
Im loading my 110 gr v max with lil gun and need some subsonic load data for my 2 heavy bullets listed above in the title. Best powder to use? Col? Starting load charge? Lil gun? A1680?
Re: 208 A max and 210 berger vld moly
We need a little more information to get you pointed in the right direction.
1. Bolt gun or AR ?
2. If AR what barrel length and what gas ystem length ?
1. Bolt gun or AR ?
2. If AR what barrel length and what gas ystem length ?
Re: 208 A max and 210 berger vld moly
16inch cmmg ar upper, 1 in 8 twist, carbine gas system
Re: 208 A max and 210 berger vld moly
I am stealing from another post, due to not having any of my data currently avaliable. Try this link for some good places to start with various bullet weights. You should be able to use the 208 amax data as a starting point for you 210 begers too.
http://www.vigilanceaero.com/CustomRelo ... umbers.pdf
I really like IMR 4227, it worked will for my 10" upper. It seemed to be much quieter to my ear than 1680. I have since shortened my upper to 7.5 and it looks like I am going to have to go back to 1680 to get enough pressure to cycle the action. There are many variations that affect your velocity and action cycling, such as barrel length, gas system length, gas port size, and suppressed or not just for starters.
I hope to get a chance to work on data for the 7.5 incher this weekend.
http://www.vigilanceaero.com/CustomRelo ... umbers.pdf
I really like IMR 4227, it worked will for my 10" upper. It seemed to be much quieter to my ear than 1680. I have since shortened my upper to 7.5 and it looks like I am going to have to go back to 1680 to get enough pressure to cycle the action. There are many variations that affect your velocity and action cycling, such as barrel length, gas system length, gas port size, and suppressed or not just for starters.
I hope to get a chance to work on data for the 7.5 incher this weekend.
Who is online
Users browsing this forum: Bing [Bot] and 21 guests