I can't speak as to which is the best but the RCBS set includes a sizing/depriming die (small base, I believe) and the bullet seating die. I believe the seater applies a taper crimp to the case.nolwark76 wrote:Since the 300 BLK needs to be seated to the ogive and several different good performing bullets have different ogives, what would you suggest for dies? Obviously the sizing die could be from any manufacturer. I was thinking of one of the competition seating dies so that it could be dialed for each ogive. Then I need to run it through the factory crimp die after that?
Which dies are in this RCBS set? Obviously new to reloading, but I've gotten good results with some of my other caliber hand loads. I guess this should be in the reloading section but I saw the RCBS dies and the question popped into my head.
Companies who are making 300 AAC BLACKOUT products
Moderators: gds, bakerjw, renegade
Re: Companies who are making 300 AAC BLACKOUT products
-
- New Member
- Posts: 6
- Joined: Thu Feb 08, 2007 6:18 pm
- Location: KY
Re: Companies who are making 300 AAC BLACKOUT products
DoubleStar has a simple ad in the April 20, 2012 Shotgun News on page 125. Not sure what they will end up offering.
Re: Companies who are making 300 AAC BLACKOUT products
Black Dawn Firearms
Re: Companies who are making 300 AAC BLACKOUT products
I was helping a buddy with his tables at a local fun show today and noticed multiple tables with 300blk uppers. AAC, CMMG, and Model 1 had about 9 different complete uppers on their table. Just an FYI.
Re: Companies who are making 300 AAC BLACKOUT products
Up to 104 companies now.
-
- Member
- Posts: 31
- Joined: Sun Nov 16, 2008 1:34 pm
- Location: Provo, Utah
- Contact:
Re: Companies who are making 300 AAC BLACKOUT products
300blk
We would like to be included on your list.
NOE Bullet Moulds
www.noebulletmoulds.com
We are running a group buy for the 311 247Gr. bullet now.
Have it from a high level source that it may be run as soon as July.
Thanks
NOE Bullet Moulds
Al Nelson
aka; SwedeNelson
We would like to be included on your list.
NOE Bullet Moulds
www.noebulletmoulds.com
We are running a group buy for the 311 247Gr. bullet now.
Have it from a high level source that it may be run as soon as July.
Thanks
NOE Bullet Moulds
Al Nelson
aka; SwedeNelson
More people die from worrying about getting ate by a bear then get ate by a bear.
Re: Companies who are making 300 AAC BLACKOUT products
110 companies now.
Re: Companies who are making 300 AAC BLACKOUT products
Over 130 companies now.
Who is online
Users browsing this forum: No registered users and 63 guests