Companies who are making 300 AAC BLACKOUT products

You can only post guns and ammo for sale or links to guns and ammo here, in the classified section, or in a dealer/manufacturer area.

Moderators: gds, bakerjw, renegade

BC98
Senior Silent Operator
Posts: 148
Joined: Fri Dec 07, 2007 9:59 pm
Location: Twin Cities, MN

Re: Companies who are making 300 AAC BLACKOUT products

Post by BC98 »

nolwark76 wrote:Since the 300 BLK needs to be seated to the ogive and several different good performing bullets have different ogives, what would you suggest for dies? Obviously the sizing die could be from any manufacturer. I was thinking of one of the competition seating dies so that it could be dialed for each ogive. Then I need to run it through the factory crimp die after that?

Which dies are in this RCBS set? Obviously new to reloading, but I've gotten good results with some of my other caliber hand loads. I guess this should be in the reloading section but I saw the RCBS dies and the question popped into my head.
I can't speak as to which is the best but the RCBS set includes a sizing/depriming die (small base, I believe) and the bullet seating die. I believe the seater applies a taper crimp to the case.
trashman43
New Member
Posts: 6
Joined: Thu Feb 08, 2007 6:18 pm
Location: KY

Re: Companies who are making 300 AAC BLACKOUT products

Post by trashman43 »

DoubleStar has a simple ad in the April 20, 2012 Shotgun News on page 125. Not sure what they will end up offering.
User avatar
300Blk
Site Admin
Posts: 7331
Joined: Mon Apr 25, 2005 9:31 am
Location: USA

Re: Companies who are making 300 AAC BLACKOUT products

Post by 300Blk »

Black Dawn Firearms
User avatar
300Blk
Site Admin
Posts: 7331
Joined: Mon Apr 25, 2005 9:31 am
Location: USA

Re: Companies who are making 300 AAC BLACKOUT products

Post by 300Blk »

300newb
Member
Posts: 49
Joined: Sat Mar 17, 2012 4:47 pm

Re: Companies who are making 300 AAC BLACKOUT products

Post by 300newb »

I was helping a buddy with his tables at a local fun show today and noticed multiple tables with 300blk uppers. AAC, CMMG, and Model 1 had about 9 different complete uppers on their table. Just an FYI.
User avatar
300Blk
Site Admin
Posts: 7331
Joined: Mon Apr 25, 2005 9:31 am
Location: USA

Re: Companies who are making 300 AAC BLACKOUT products

Post by 300Blk »

Up to 104 companies now.
swedenelson
Member
Posts: 31
Joined: Sun Nov 16, 2008 1:34 pm
Location: Provo, Utah
Contact:

Re: Companies who are making 300 AAC BLACKOUT products

Post by swedenelson »

300blk

We would like to be included on your list.
NOE Bullet Moulds
www.noebulletmoulds.com

We are running a group buy for the 311 247Gr. bullet now.
Have it from a high level source that it may be run as soon as July.

Thanks
NOE Bullet Moulds
Al Nelson
aka; SwedeNelson
More people die from worrying about getting ate by a bear then get ate by a bear.
User avatar
300Blk
Site Admin
Posts: 7331
Joined: Mon Apr 25, 2005 9:31 am
Location: USA

Re: Companies who are making 300 AAC BLACKOUT products

Post by 300Blk »

110 companies now.
User avatar
300Blk
Site Admin
Posts: 7331
Joined: Mon Apr 25, 2005 9:31 am
Location: USA

Re: Companies who are making 300 AAC BLACKOUT products

Post by 300Blk »

User avatar
300Blk
Site Admin
Posts: 7331
Joined: Mon Apr 25, 2005 9:31 am
Location: USA

Re: Companies who are making 300 AAC BLACKOUT products

Post by 300Blk »

Over 130 companies now.
Post Reply

Who is online

Users browsing this forum: No registered users and 20 guests