Feeding Issues
Moderators: gds, bakerjw, renegade
Feeding Issues
I am having feeding issues with the 16" barrel and the carbine length gas tube using the Remington 220gr OTM unsuppressed? Brand new build.
- chrismartin
- Silencertalk Goon Squad
- Posts: 243
- Joined: Sun Mar 12, 2006 9:18 pm
- Location: Tidewater, VA
Re: Feeding Issues
I would try the following:
Carrier drag: Make sure the gas tube is not dragging on the carrier key?
Buffer weight: Try a lighter buffer and spring combination?
Clean: Make sure everything is nice and clean and lubed up. If you are using a thick grease, try a lighter oil?
Carrier drag: Make sure the gas tube is not dragging on the carrier key?
Buffer weight: Try a lighter buffer and spring combination?
Clean: Make sure everything is nice and clean and lubed up. If you are using a thick grease, try a lighter oil?
Re: Feeding Issues
We don't recommend subsonic without a silencer with our barrels, it is probably just short cycling.
Use a carbine buffer and standard spring and it should at least cycle. You may have a problem with the carrier, try a know functioning carrier.
Use a carbine buffer and standard spring and it should at least cycle. You may have a problem with the carrier, try a know functioning carrier.
Todd
Who is online
Users browsing this forum: No registered users and 9 guests