Was over on the PWS website looking up prices on a 7.62x39 upper and saw this.
http://primaryweapons.com/store/pc/view ... ategory=11
I wasn't aware they were working on a 300 BLACKOUT but they produce a 14.5 with a 51T pinned and I'm on it.
PWS MK116 300 BLACKOUT Piston Driven Upper 16"
Moderators: gds, bakerjw, renegade
- blackoutbuster
- New Member
- Posts: 8
- Joined: Wed Nov 02, 2011 3:51 pm
Re: PWS MK116 300 BLACKOUT Piston Driven Upper 16"
Hi-
In parsing your post/link, I noted they have full piston-driven rifles in 300 BLK @ $1599. That's not a bad price, and as far as I know their weapons are supposed to be top-notch.
Thanks-
In parsing your post/link, I noted they have full piston-driven rifles in 300 BLK @ $1599. That's not a bad price, and as far as I know their weapons are supposed to be top-notch.
Thanks-
300 BLACKOUT Buster
Re: PWS MK116 300 BLACKOUT Piston Driven Upper 16"
I like the 9.5 upper and complete as well.
http://primaryweapons.com/store/pc/view ... ategory=11
http://primaryweapons.com/store/pc/view ... ategory=11
"None are more hopelessly enslaved than those who falsely believe they are free." -Goethe
Re: PWS MK116 300 BLACKOUT Piston Driven Upper 16"
i'm eyeballing one of those 10in uppers as well, does anyone here have hands on with one?
- copenhagen
- Senior Silent Operator
- Posts: 103
- Joined: Mon Oct 18, 2010 8:37 pm
- Location: South Carolina
Re: PWS MK116 300 BLACKOUT Piston Driven Upper 16"
You wouldn't like the 9.5 if you realized that the oem rails are too long to mount a 51T without taking them off and then to top it off, still too long to allow the suppressor to screw down properly. A real superb piece of engineering....let's make an upper which we have reason to believe people will use silencers on, but lets make the rails so that they prevent silencer use.....
Re: PWS MK116 300 BLACKOUT Piston Driven Upper 16"
The one I looked at was long enough to clear the rail system so when I said "10in" I just meant their short one. I want to make a form 1 can in a reflex style and may end up cutting the barrel shorter anyway. I'm going to need to sell a few things first though.
Re: PWS MK116 300 BLACKOUT Piston Driven Upper 16"
1:8 twist. Obviously an inferior, outdated design, and a complete waste of money, now that 1:7 has taken over.Blackwind wrote:Was over on the PWS website looking up prices on a 7.62x39 upper and saw this.
http://primaryweapons.com/store/pc/view ... ategory=11
I wasn't aware they were working on a 300 BLACKOUT but they produce a 14.5 with a 51T pinned and I'm on it.
/sarcasm
Re: PWS MK116 300 BLACKOUT Piston Driven Upper 16"
sorry, it's been almost a year since i was reading on the 300blk round, 1/8 is a good twist or there is new research to say other?
Re: PWS MK116 300 BLACKOUT Piston Driven Upper 16"
A 1:7 twist barrel is said to kill things deader than the 1:8 barrel on odd numbered Tuesdays
.
Ron
.
Ron
Re: PWS MK116 300 BLACKOUT Piston Driven Upper 16"
Well that's jacked up. LOLcopenhagen wrote:You wouldn't like the 9.5 if you realized that the oem rails are too long to mount a 51T without taking them off and then to top it off, still too long to allow the suppressor to screw down properly. A real superb piece of engineering....let's make an upper which we have reason to believe people will use silencers on, but lets make the rails so that they prevent silencer use.....
Who is online
Users browsing this forum: No registered users and 40 guests