Berry's plated 150 gr bullet

Moderators: gds, bakerjw, renegade, bamachem

upsdood
Member
Posts: 12
Joined: Sat May 02, 2020 12:03 pm

Re: Berry's plated 150 gr bullet

Post by upsdood »

this was just the thread i was looking for... i will be forming cases from LC brass and using the berrys 30-30 round shoulders. whats the proper COAL for cfe blk.? according to hodgdon the COAL should be 2.235"but the berry's projectile is shorter than the hornady bullet listed.

edit: i will be using a AR platform that has m4 feedramps
psb
New Member
Posts: 1
Joined: Sat Jun 06, 2020 6:06 pm

Re: Berry's plated 150 gr bullet

Post by psb »

I can’t get these to feed. They always end up jammed across the chamber as if the tip of the bullet pops up too much.

What’s the secret?

FYI: the cases seem to be properly sized and drop straight into the chamber.
ironhead7544
Member
Posts: 34
Joined: Wed Apr 25, 2018 12:57 pm

Re: Berry's plated 150 gr bullet

Post by ironhead7544 »

I recently loaded up some of the 30-30 RS bullets with a start load of WW296. COL was set at 1.950. Perfect feeding and function.

Also tried 1.900 and it worked with my AR just fine.
Post Reply

Who is online

Users browsing this forum: Semrush [Bot] and 144 guests