I have a thread for this mold to get put back in inventory if anyone would like to sign up for one.
http://noebulletmolds.com/smf/index.php?topic=1792.0
NOE 247 HP mold for 300 blackout
Moderators: gds, bakerjw, Dolomite_Supafly
- bangbangping
- Silent But Deadly
- Posts: 2695
- Joined: Sun Sep 15, 2013 6:34 pm
- Location: Texas Gulf Coast
Re: NOE 247 HP mold for 300 blackout
Welcome to the forum. If you haven't seen this thread, check it out.
viewtopic.php?f=185&t=98341&start=20
viewtopic.php?f=185&t=98341&start=20
Re: NOE 247 HP mold for 300 blackout
Yep just read that today. Need someone to make me some new pins as soon as I get this mold now.
- bangbangping
- Silent But Deadly
- Posts: 2695
- Joined: Sun Sep 15, 2013 6:34 pm
- Location: Texas Gulf Coast
Re: NOE 247 HP mold for 300 blackout
I don't know how swede does his pins, but it may be worth seeing if he'll change them for the next run. It certainly would save people some time and money.xdmalder wrote:Yep just read that today. Need someone to make me some new pins as soon as I get this mold now.
Re: NOE 247 HP mold for 300 blackout
What depth of pins did you finally settle on?
- bangbangping
- Silent But Deadly
- Posts: 2695
- Joined: Sun Sep 15, 2013 6:34 pm
- Location: Texas Gulf Coast
Re: NOE 247 HP mold for 300 blackout
Yondering could probably tell you more precisely, but I measured them at .170 diameter X .33 deep.
-
- Silent But Deadly
- Posts: 185
- Joined: Mon Jan 14, 2013 7:11 pm
Re: NOE 247 HP mold for 300 blackout
Wow, that is one ideal mushroom - I want this mould for certain.
Thanks
Thanks
-
- Senior Silent Operator
- Posts: 146
- Joined: Mon Nov 28, 2016 7:50 am
Re: NOE 247 HP mold for 300 blackout
What's the minimum fps to keep this bullet stable? I have the 230 Noe and I get holes with rips every now and then.
- bangbangping
- Silent But Deadly
- Posts: 2695
- Joined: Sun Sep 15, 2013 6:34 pm
- Location: Texas Gulf Coast
Re: NOE 247 HP mold for 300 blackout
If you're doing everything right, they should be stable as slow as you'd reasonably want to shoot them.Rooter pig wrote:What's the minimum fps to keep this bullet stable? I have the 230 Noe and I get holes with rips every now and then.
FWIW, I was working up a load on Saturday and shot twelve groups of three, with group velocities from 950 to 1025 fps. The 950 fps group was 1/2" @ 50.
-
- Senior Silent Operator
- Posts: 146
- Joined: Mon Nov 28, 2016 7:50 am
Re: NOE 247 HP mold for 300 blackout
I have shot some great groups with that bullet . Sized just under .311
But for some reason the accuracy has dropped off. Water dropped ww's
With 1680. I have the 150 grain noe with the pointy front end shooting great with h110.
But for some reason the accuracy has dropped off. Water dropped ww's
With 1680. I have the 150 grain noe with the pointy front end shooting great with h110.
Who is online
Users browsing this forum: No registered users and 46 guests