Does anyone know whether coated cast bullets from Missouri Bullets or Leatherhead will feed in an AR? I wanted to hear from others experience before I buy something that may not work.
Thanks
Cast bullets for AR
Moderators: gds, bakerjw, Dolomite_Supafly
-
- Silent But Deadly
- Posts: 197
- Joined: Sun Sep 30, 2012 9:45 am
Re: Cast bullets for AR
Woodsmoke,
We have shipped 10's of thousands of our projectiles to AR shooters across the country. Some have minor feeding issues that are generally related to the choice of magazine, case OAL, and /or powder. Please feel free to give me a call with any questions etc. I will gladly share any information regarding reloading set up, mag choices, etc. to get you up and running.
Thanks for your consideration,
Chris
Leatherhead Bullets LLC
(208)250-0526
We have shipped 10's of thousands of our projectiles to AR shooters across the country. Some have minor feeding issues that are generally related to the choice of magazine, case OAL, and /or powder. Please feel free to give me a call with any questions etc. I will gladly share any information regarding reloading set up, mag choices, etc. to get you up and running.
Thanks for your consideration,
Chris
Leatherhead Bullets LLC
(208)250-0526
Re: Cast bullets for AR
I've shot about 500 245s from Missouri Bullet Co without a problem. I have filed the ribs out of the PMags and labeled "300 BLK" in silver sharpie. Very Happy.
Re: Cast bullets for AR
Thanks for the replies, that's what I was looking for. You just made a customer Chris, I'll be ordering soon.
-
- Silent But Deadly
- Posts: 197
- Joined: Sun Sep 30, 2012 9:45 am
Re: Cast bullets for AR
Looking forward to hearing from you! We have plenty in stock.
Thank you for your interest in our products.
Chris
Leatherhead Bullets
Thank you for your interest in our products.
Chris
Leatherhead Bullets
Re: Cast bullets for AR
I've shot several hundred Leatherhead. You're probably going to have to load them shorter than you think, like I did. I believe most people are shooting them ~1.90-2.00.
- cornmastah
- Member
- Posts: 49
- Joined: Mon Jan 21, 2013 3:14 am
- Location: Utah
- Contact:
Re: Cast bullets for AR
I have shot about 1000 of the missouri 245's through my SBR and 16" carbine.
Re: Cast bullets for AR
I have shot many of the Leatherhead bullets, mostly with my 10.5" Noveske. I don't think I have had any feeding/cycling issues with them through the Noveske. My upper with the 16" PSA (FN Barrel) usually hangs up on the very last one, but I have not used it enough to see if I could correct that. With no supporting round under it, I think the last round has just enough tilt for the flat nose to catch on the chamber face. My Noveske chamber is more funnel shaped, which I think is a good reason why the flat nose bullets run so well with it.
I think most likely they will work fine, and if not, a small tweak can fix it.
I think most likely they will work fine, and if not, a small tweak can fix it.
300BLK AR-15 with 10.5" Noveske barrel (1:7 pistol length gas)
300BLK 16" AAC Handi Rifle (1:7 twist)
300BLK 16" AR-15 with 16" PSA FN barrel upper (1:8 pistol length gas)
300BLK 16" AAC Handi Rifle (1:7 twist)
300BLK 16" AR-15 with 16" PSA FN barrel upper (1:8 pistol length gas)
- Dolomite_Supafly
- Silent But Deadly
- Posts: 3017
- Joined: Fri Oct 30, 2009 7:03 am
- Location: East Tennessee
- Contact:
Re: Cast bullets for AR
I will also say IdahoFireman is a great guy selling a great product.
WWW.thegunmilitia.com
Come join the militia!
Come join the militia!
-
- Member
- Posts: 25
- Joined: Wed Sep 09, 2015 6:17 pm
Re: Cast bullets for AR
I just jumped into the PC ring(powder coat not politically correct)
Don't know if I will PC the whole bullet (Lee 230gr 5R) or just the lube groove section.
Might try both to see how they work.
Don't know if I will PC the whole bullet (Lee 230gr 5R) or just the lube groove section.
Might try both to see how they work.
Who is online
Users browsing this forum: No registered users and 47 guests