**THE ORIGINAL FASTEST BLACKOUT JIG ** IN STOCK****
Moderators: gds, bakerjw, renegade, tba02
Re: Case cut off tool ***EDIT VIDEO ADDED***
I got mine set up this morning and it was a piece of cake. It only took 3 cuts to get it adjusted just right.
- vz58
- Silent But Deadly
- Posts: 1437
- Joined: Fri Jul 29, 2011 11:57 am
- Location: Smack dab in the middle of NC
Re: Case cut off tool ***EDIT VIDEO ADDED***
How many cases have you run?
What lengths are you setting it to?
How many cases a minute?
Every 100 rds a little bit of Hornady one shot in the bore smooths things out. After the first 500 then a squirt every 500 and after sitting a while.
It takes a little bit to get the hang of it, I can only do about 20-25 cases a minute but a few guys who do a bunch are at about 35 a minute.
What lengths are you setting it to?
How many cases a minute?
Every 100 rds a little bit of Hornady one shot in the bore smooths things out. After the first 500 then a squirt every 500 and after sitting a while.
It takes a little bit to get the hang of it, I can only do about 20-25 cases a minute but a few guys who do a bunch are at about 35 a minute.
Re: Case cut off tool ***EDIT VIDEO ADDED***
Put me down for one as well.
Re: Case cut off tool ***EDIT VIDEO ADDED***
All I did was get it set up. Making brass will be a winter project for me.vz58 wrote:How many cases have you run?
What lengths are you setting it to?
How many cases a minute?
Every 100 rds a little bit of Hornady one shot in the bore smooths things out. After the first 500 then a squirt every 500 and after sitting a while.
It takes a little bit to get the hang of it, I can only do about 20-25 cases a minute but a few guys who do a bunch are at about 35 a minute.
- M_Derelict
- Silent Operator
- Posts: 67
- Joined: Wed May 02, 2012 5:39 pm
Re: Case cut off tool ***EDIT VIDEO ADDED***
I am in. PM sent!
Re: Case cut off tool ***EDIT VIDEO ADDED***
I got mine in the mail today, took off the vise mechinism that comes with the chop-saw and put it on. The thing that was so neat about it was the maker used slots on the fixture so the user can adjust the length of the cut to what ever the user wants, this is a nice feature because now it can be used for more than 1 thing.
I was instantly amazed at how easy and fast it was to chop the brass to the length I wanted. I haven't got the procedure down pat yet because I had a system of doing things the old way, and now I have to re-train myself now, but at any rate I'm now getting them done at a rate of 20pcs min, give me some time with it and I'm sure I'll increase those numbers in a day easily.
Thanks a bunch for coming up with that idea and making it work for us other guys, this little gizmo is a blessing.
I was instantly amazed at how easy and fast it was to chop the brass to the length I wanted. I haven't got the procedure down pat yet because I had a system of doing things the old way, and now I have to re-train myself now, but at any rate I'm now getting them done at a rate of 20pcs min, give me some time with it and I'm sure I'll increase those numbers in a day easily.
Thanks a bunch for coming up with that idea and making it work for us other guys, this little gizmo is a blessing.
If you don't learn from history your doomed to repeat its mistakes
Link to my other sales page: http://castboolits.gunloads.com/forumdisplay.php?117-Grumpa
Link to my other sales page: http://castboolits.gunloads.com/forumdisplay.php?117-Grumpa
Re: Case cut off tool ***EDIT VIDEO ADDED***
I also received mine yesterday. The directions were nice addition. I want to add some info. The directions state the included screws will adapt to the saw, which it did. I had a 10x32 tap and threaded the right hole from the bottom of the saw rather than just using the included screw to cut new threads. The tap cut maybe 6-8 threads. The screw went in perfectly. As one of the posters wrote about the product being a little rough, it is but it works perfectly, especially for $30 shipped.
-
- New Member
- Posts: 2
- Joined: Tue Oct 27, 2009 6:07 pm
Re: Case cut off tool ***EDIT VIDEO ADDED***
Paypal sent with address in comments section.
Thank you.
Thank you.
-
- New Member
- Posts: 3
- Joined: Sun Jul 22, 2012 1:21 am
- Location: Charlotte, NC
- Contact:
Re: Case cut off tool ***EDIT VIDEO ADDED***
I want two if they're available now. I can't seem to get a PM through though, maybe because I'm a newer member? Will you please email me with payment total and instructions please? Thank you.
John
[email protected]
John
[email protected]
- Smoke
- Silent But Deadly
- Posts: 184
- Joined: Thu Mar 15, 2012 12:31 pm
- Location: right here.. At least I was earlier
Re: Case cut off tool ***EDIT VIDEO ADDED***
Recoil Junkie
I just got 5 more sets of RCBS 300 BLKOUT dies if you need any
see you soon
I just got 5 more sets of RCBS 300 BLKOUT dies if you need any
see you soon
FFL, SOT
lover of things that go bang or silently make things fall over C:
lover of things that go bang or silently make things fall over C:
Who is online
Users browsing this forum: No registered users and 106 guests