JP Enterprises silent captured spring system

Moderators: gds, bakerjw, renegade

BarNone
Silent Operator
Posts: 77
Joined: Sun Jan 06, 2013 10:29 pm

JP Enterprises silent captured spring system

Post by BarNone »

Anyone tried this?
I just completed my Suppressed AAC 9" SBR and would like to reduce the noise of the buffer and spring as it is now the loudest part of the gun.
tallburnedmidget
Silent But Deadly
Posts: 3808
Joined: Wed Jun 13, 2012 9:01 pm

Re: JP Enterprises silent captured spring system

Post by tallburnedmidget »

It is good to go, see here for one of the threads on it viewtopic.php?f=128&t=84933
mech5700
Silent But Deadly
Posts: 178
Joined: Sun Sep 02, 2012 5:54 pm

Re: JP Enterprises silent captured spring system

Post by mech5700 »

Love it. No noise from the buffer anymore. Some people dont like it because it takes away the audible difference when the bolt locks back, but you can still feel when it does.
BarNone
Silent Operator
Posts: 77
Joined: Sun Jan 06, 2013 10:29 pm

Re: JP Enterprises silent captured spring system

Post by BarNone »

Just ordered one.
mech5700
Silent But Deadly
Posts: 178
Joined: Sun Sep 02, 2012 5:54 pm

Re: JP Enterprises silent captured spring system

Post by mech5700 »

I left my buffer detent out when i installed the jp, it is much easier to work with that way... Just push the hammer down and slide it in.
User avatar
Dystaxia
Silent But Deadly
Posts: 202
Joined: Wed Jun 12, 2013 11:04 pm
Location: AL

Re: JP Enterprises silent captured spring system

Post by Dystaxia »

Just ordered ones as well.

They also give Military/LEO discounts too.

"Thank you for your service. Active Military and Law Enforcement will receive Dealer pricing which is -10% on rifles and uppers, -20% on other products we manufacture."

Even better!
eastern_hunter
Senior Silent Operator
Posts: 131
Joined: Sat Nov 21, 2009 10:34 pm
Location: Charleston, WV

Re: JP Enterprises silent captured spring system

Post by eastern_hunter »

These work with 5.56 and 6.8 with the correct springs?
Guido2006
New Member
Posts: 3
Joined: Sat Oct 21, 2006 8:31 pm
Location: Texas

Re: JP Enterprises silent captured spring system

Post by Guido2006 »

Supressed, with an 8" Noveske 300BLK on a PK arms upper/bolt, no issues cycling 125 grain supersonic ammo.
User avatar
Dystaxia
Silent But Deadly
Posts: 202
Joined: Wed Jun 12, 2013 11:04 pm
Location: AL

Re: JP Enterprises silent captured spring system

Post by Dystaxia »

16 inch 300BLK, suppressed with an AAC SDN6, shooting NOE 311247 boolits. Zero problems and definitely quieter!
Suputin221
Silent But Deadly
Posts: 349
Joined: Thu Dec 22, 2011 9:03 pm

Re: JP Enterprises silent captured spring system

Post by Suputin221 »

mech5700 wrote:I left my buffer detent out when i installed the jp, it is much easier to work with that way... Just push the hammer down and slide it in.
Does the JP system have issues going in and out with the buffer detent in place? I made my own and it can be a real bitch to install and remove with the buffer detent in place.
Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 40 guests