Re: Subsonic 6 ft. impact
Posted: Mon Dec 09, 2019 9:13 pm
I appreciate everyone's assistance in this matter. I get back to you with updates as they develop.
Thanks, Pav
Thanks, Pav
thats not fair to lay that onto BCA. it appears that THEY were fooled by people with fraudlent docs that got past e-verify. otherwise why wouldnt they have been nailed for a HUGE fine, or even forced to close their doors, etcJohn A. wrote: ↑Mon Dec 09, 2019 8:22 pm
Also, there is this:
https://rantnc.com/2019/02/05/ice-agent ... ing-plant/
and the article is clearly anti-homeland security anti-ice, which of course puts it right in line with bashing a firearms business too.Update (2:02 p.m.): Bear Creek Arsenal issued the following statement to the Rant regarding the arrests: “Today there were several employees of Bear Creek Arsenal who were detained by law enforcement. This is a result of an investigation conducted by Homeland Security into employment that was obtained by either ID theft or fraudulent information. Bear Creek Arsenal has cooperated with Homeland Security during this lengthy process. Homeland Security confirmed that our Human Resource Department had complied with all laws, rules, and regulations in our hiring practice.”
I looked at the VG Gamma device. If you are installing that with the provided crush washer, that is more than likely the problem. Not the muzzle device itself.Pavsuper wrote: ↑Mon Jan 06, 2020 10:25 pm I finally found out what was causing the bullet to impact the burm so high... it was the muzzle device. The Griffin Armarment 30 SD when purchased comes with muzzle devices.
https://www.silencershop.com/silencers/ ... 0sd-k.html
unfortuntely for my new 300 blackout upper i chose to have a VG^ Gamma 300BLK
https://www.vg6precision.com/vg6-gamma-300blk
Well went out this weekend and swapped the one i had on my AR10 and guess what it worked. All tests with and without suppressor were on paper and in the same 1.5 inch group. Three different weight rounds, 168gr, 175gr, and 190gr.
I thank you all for the advice.
Pavsuper wrote: ↑Mon Jan 06, 2020 10:25 pm I finally found out what was causing the bullet to impact the burm so high... it was the muzzle device. The Griffin Armarment 30 SD when purchased comes with muzzle devices.
https://www.silencershop.com/silencers/ ... 0sd-k.html
unfortuntely for my new 300 blackout upper i chose to have a VG^ Gamma 300BLK
https://www.vg6precision.com/vg6-gamma-300blk
Well went out this weekend and swapped the one i had on my AR10 and guess what it worked. All tests with and without suppressor were on paper and in the same 1.5 inch group. Three different weight rounds, 168gr, 175gr, and 190gr.
I thank you all for the advice.