Scar owners ???

Moderators: gds, bakerjw, renegade

Post Reply
Guest762
Silent But Deadly
Posts: 848
Joined: Mon Aug 04, 2014 1:14 pm
Location: ARKANSAS

Scar owners ???

Post by Guest762 » Thu Aug 30, 2018 7:46 pm

Scar 17 owners that are running a silencer

Did you use the kba shoulder ring ?
Did you change the gas port ?

BulletFlight for Android
ARx3
New Member
Posts: 9
Joined: Mon Sep 19, 2016 6:08 pm
Location: Kansas

Re: Scar owners ???

Post by ARx3 » Sat Sep 15, 2018 12:32 am

Guest762 wrote:Scar 17 owners that are running a silencer

Did you use the kba shoulder ring ?


Did you change the gas port ?


No, I run a older Surefire FA762K suppressor with a FH762K-SCAR-HC flashider

No

User avatar
A-Game
Silent But Deadly
Posts: 1193
Joined: Sat Sep 28, 2013 3:05 pm
Location: Phoenix, AZ

Re: Scar owners ???

Post by A-Game » Sat Sep 15, 2018 9:28 am

Guest, I have Scar 17 and 16, there is no need to change gas rings. The rifle was designed for silencer use with the two gas settings of suppressed and unsuppressed. I have never had a reliability issue with suppressing multiple Scars.

I do not use a shoulder ring with my Sig SRD 7.62TiQD because the mount was not designed for use with a 90 degree shoulder. I also have not needed one with My YHM bargain 5.56 silencer.

T Mark Graham at Arizona Response Systems has 13 SCAR rifles. He is a Master Gunsmith and probably owns more SCARs than any individual in the country. He uses AAC silencers on his and I believe he does not use the KBA ring on his rifles. I will double check and report back.

Edit: There was no need for the ring with the AAC Blackout flash hiders.
Industry Pro Staff for Dynamic Research Technologies When One Shot is All You Get www.drtammo.com https://www.facebook.com/drtammo/
Join the Revolution http://youtube.com/watch?v=3_Xnx3BFuLk

Smurky
Silent Operator
Posts: 64
Joined: Thu Aug 11, 2016 5:22 pm
Location: Democratic Peoples Republik of Dane County Wisconsin

Re: Scar owners ???

Post by Smurky » Sun Sep 16, 2018 8:08 am

Silencer Shop published a “compatibility list” for the SCAR, I have a SilencerCo Saker and when I had the 16” barrel installed it without a shoulder ring. When I got the 13” barrel I did get a KBA ring and used it. Both aligned well and have worked flawlessly with Factory ammo. I’ve worked up some lighter loads with 4895 and Hornady 150 FMJBT for plinking and in a carbine league, less gas and virtually no recoil with that load.

https://www.silencershop.com/blog/post/ ... ility-list

Post Reply