I'm installing a muzzle brake to mount my Saker. Are these the peel washers to use? The usual places seem to be out of stock. McMaster is a safe bet, and I can get some other stuff in the box. (Or I could've gotten these in the last box, but oh well.)
https://www.mcmaster.com/#standard-wash ... s/=1e933do
Thanks, Dutch
Peel washers ?
Moderators: gds, bakerjw, renegade
-
- Silent But Deadly
- Posts: 368
- Joined: Wed Feb 06, 2008 3:36 pm
- Location: Baltimore, People's Republic of MD
Peel washers ?
Making the bad man go away since 1982.
Re: Peel washers ?
Which mount are you using and does it need to be timed?
Whatever you do never ever use crush washers or anything like that.
I know Griffin sells them.
Whatever you do never ever use crush washers or anything like that.
I know Griffin sells them.
-
- Silent But Deadly
- Posts: 368
- Joined: Wed Feb 06, 2008 3:36 pm
- Location: Baltimore, People's Republic of MD
Re: Peel washers ?
Thanks, I'll look at Griffin if I have to.alamo5000 wrote:Which mount are you using and does it need to be timed?
Whatever you do never ever use crush washers or anything like that.
I know Griffin sells them.
These aren't crush washers. I guess the right link would help - here's the 1/2" size:
https://www.mcmaster.com/#90902a223/=1e94w11
Making the bad man go away since 1982.
Re: Peel washers ?
Here's the specs from Thunder Beast, look like the one you linked are close.DutchV wrote:Thanks, I'll look at Griffin if I have to.alamo5000 wrote:Which mount are you using and does it need to be timed?
Whatever you do never ever use crush washers or anything like that.
I know Griffin sells them.
These aren't crush washers. I guess the right link would help - here's the 1/2" size:
https://www.mcmaster.com/#90902a223/=1e94w11
OUTSIDE DIAMETER 0.840-0.845"
INITIAL THICKNESS OF APPROX 0.048-0.055"
LAYER THICKNESS APPROX 0.002"
300 Blackout, not just for sub-sonics.
-
- Silent But Deadly
- Posts: 368
- Joined: Wed Feb 06, 2008 3:36 pm
- Location: Baltimore, People's Republic of MD
Re: Peel washers ?
Yup, that would do it.
I think I'd prefer the shorter layers ( .002" ) of the peel washer. I'm trying to do things right the first time, for once.
Making the bad man go away since 1982.
Who is online
Users browsing this forum: No registered users and 51 guests