With an 8.5" rail you could get a little interference. Depending on which mounting system you use. The pic below is with a Noveske 8.5" Navy barrel with a BCM 7" KMR which actually measures 7.3" in length. So with a 1.2" difference in length, there is only about .5" of space. Using this math you can see that you will get some interference if you have less than 3/4" difference between your rail and barrel.
Look into the Knights URX 4 M-Lok 8" rail. Its a great rail that is perfect for the 9" barrels. Will leave about 1/4" of space......perfect.
Space between rail and suppressor on your SBR
Moderators: gds, bakerjw, renegade
- Overton-AR
- Silent But Deadly
- Posts: 1191
- Joined: Tue Nov 03, 2009 4:16 am
- A Boy Named Sue
- Senior Silent Operator
- Posts: 140
- Joined: Sun Sep 18, 2016 5:19 am
- Location: Louisiana, Down the Bayou
Re: Space between rail and suppressor on your SBR
Yea, I actually went by their warehouse today (one of maybe 3 perks to living in Central FL. ) I picked up an adjustable gas block and a 8" rail. They had... a lot of rails in there. It was kinda overwhelming. But super cool people, they let me try anyones I wanted on my receiver and barrel. I may return the one I got for one that was in their anodizer to see if I like that one better. I got this one http://slrrifleworks.com/index.php?rout ... uct_id=660steven11b wrote:More then likely youll need about 3/4" of difference from rail length vs. Barrel length. If you have not looked into SLR industry, on their website they have tons of different lengths and types. I have built a few different AR's with there rails and gas block and they are my top choice now.
The time calls for dark men to do dark things.
Do not be afraid to lead them to it.
Do not be afraid to lead them to it.
Re: Space between rail and suppressor on your SBR
Here's a 10.5" BA barrel with an AAC Brakeout 2.0 installed under a 9" BCM Keymod Alpha rail, with an AAC 7.62 SD attached:
http://rs1283.pbsrc.com/albums/a552/dbl ... 0&fit=clip
Not sure how to get the image to appear...
http://rs1283.pbsrc.com/albums/a552/dbl ... 0&fit=clip
Not sure how to get the image to appear...
- A Boy Named Sue
- Senior Silent Operator
- Posts: 140
- Joined: Sun Sep 18, 2016 5:19 am
- Location: Louisiana, Down the Bayou
Re: Space between rail and suppressor on your SBR
Thanks for the help, guys. I decided to go with the SOLO Intrepid in 8.19" http://slrrifleworks.com/index.php?rout ... uct_id=387
dellet, super helpful link. Thanks man.
dellet, super helpful link. Thanks man.
The time calls for dark men to do dark things.
Do not be afraid to lead them to it.
Do not be afraid to lead them to it.
-
- Silent But Deadly
- Posts: 349
- Joined: Tue Aug 23, 2016 7:15 pm
Re: Space between rail and suppressor on your SBR
Hmm I'm running a 9 inch Seekins BAR with a 7.5 inch barrel and a direct thread Form 1. How about Negative measurements
Re: Space between rail and suppressor on your SBR
Hey boolit_head! That looks an awful lot like my form 1 suppressor. Recessed under the handguard and all. 8" barrel, 10" handguard but a 10" suppressor underneath on mine. The suppressor rarely if ever comes off.
Re: Space between rail and suppressor on your SBR
Good choice, you wont be disappointed with SLR.A Boy Named Sue wrote:Thanks for the help, guys. I decided to go with the SOLO Intrepid in 8.19" http://slrrifleworks.com/index.php?rout ... uct_id=387
dellet, super helpful link. Thanks man.
Life is hard but its harder if your stupid-John Wayne
Who is online
Users browsing this forum: No registered users and 42 guests