Accuracy problems with suppressor

Moderators: gds, bakerjw, renegade

Post Reply
Buckhunterhite
New Member
Posts: 2
Joined: Thu Nov 28, 2019 11:34 am

Accuracy problems with suppressor

Post by Buckhunterhite » Thu Nov 28, 2019 11:54 am

I got my silencerco saker 762 about 2 weeks ago. First can so no past experience. Got it for my boys to hunt with. While waiting on stamp baught a radical blackout 16" upper to run on my dpms 5.56 lower. Shoots subs and supersonic great "a couple different brands shoot sub 1inch groups at 100yards". Put suppressor on and turns into 10" groups at 50 yards. Ive tried ammo from 208 gr sub to 260gr sub 5 or 6 different brands, And 2 different brands of supersonic. So I put it on my anderson 7.62x39 same thing with 124 gr hollow point. Called radical asked about the blackout I I baught of theirs. Was told I should run a h1 buffer. The guys at the shop I got the suppressor from said I need adjustable gas block.

I'm definitely not an ar guy been a gun guy my whole life. The ar's ar fin to shoot and I thought this would be a great way to get my 2 younger boys on deer without the recoil and need for hearing protection but I'm very frustrated as we now have 3 days left in Indiana gun season. So what should i do to get it running for coyotes, summer plinking and next deer season.

Thanks!!!!

BulletFlight for Android
User avatar
bangbangping
Silent But Deadly
Posts: 2508
Joined: Sun Sep 15, 2013 6:34 pm
Location: Texas Gulf Coast

Re: Accuracy problems with suppressor

Post by bangbangping » Thu Nov 28, 2019 12:53 pm

Most likely the suppressor is either loose or misaligned. If you're sure the mount is tight, get an alignment rod to check alignment. Radical isn't exactly top shelf...wouldn't be a shock if you needed a new barrel.

User avatar
SwampDog_13
Silent But Deadly
Posts: 535
Joined: Wed Jan 13, 2016 2:15 pm
Location: NC swamp

Re: Accuracy problems with suppressor

Post by SwampDog_13 » Thu Nov 28, 2019 4:20 pm

Not sure why either company would think it's a gas issue, that should have nearly nothing to do with it.

Have you inspected the suppressor thoroughly? Being as it's doing the same thing on both guns the likely hood of both barrels/muzzle devices being misalign, while not impossible, is very improbable. I'd check real good for a possible baffle strike then like bang recommended an alignment rod would be a very helpful tool.

Buckhunterhite
New Member
Posts: 2
Joined: Thu Nov 28, 2019 11:34 am

Re: Accuracy problems with suppressor

Post by Buckhunterhite » Thu Nov 28, 2019 11:12 pm

I checked, and so did the gun shop. No baffle strikes form what either of us can see.

User avatar
eowen37
Member
Posts: 17
Joined: Fri May 03, 2019 1:39 pm

Re: Accuracy problems with suppressor

Post by eowen37 » Fri Nov 29, 2019 7:39 am

If you are using the silencerco asr mount system make sure you seat the can against the muzzle device hand tight before engaging the locking ring.

Post Reply