What other caliber to SBR?

Moderators: gds, bakerjw, renegade

golfindia
Silent But Deadly
Posts: 1380
Joined: Thu Jun 20, 2013 1:16 pm

Re: What other caliber to SBR?

Post by golfindia »

tXr wrote:If I was to do a 9mm I think I would do one of these 80% lowers from NFA, https://newfrontierarmory.com/shop/c-9- ... tyle-mags/ uses Glock mags.
I would like to know if these will fit in an Ares Armor jig.....

I've never been able to warm up to the glock mag style. Glock 30rd mags are an SOB to load the last 10 rds, and the aftermarket Korean ones i have don't always work well when full (feed lips don't hold the rounds securely). Factory glock 30rounders are expensive. Colt mags are easier to load and are always available for less than $20....
realtreehunter
Silent But Deadly
Posts: 191
Joined: Wed May 22, 2013 3:01 pm

Re: What other caliber to SBR?

Post by realtreehunter »

farm use wrote:If you did a 9mm sbr build you would probably want a dedicated lower. But they are a lot of fun. I have a few SBRs, and thought I would only build one. One is a 12" Grendel, believe it or not its a awesome round for short barrel. Most think as I did before that the grendel is only for long barrels, ITS NOT. I have a 18" grendel also, and im not really losing much in 6". Iv taking it out to 600 yrds pretty easy and im sure it will go further.
That's interesting, I thought that would definitely be a longer barrel round. I have considered building a Grendel in a 20 inch upper but just never have. What kind of velocities are you getting from your 12" Grendel?
realtreehunter
Silent But Deadly
Posts: 191
Joined: Wed May 22, 2013 3:01 pm

Re: What other caliber to SBR?

Post by realtreehunter »

tXr wrote:If I was to do a 9mm I think I would do one of these 80% lowers from NFA, https://newfrontierarmory.com/shop/c-9- ... tyle-mags/ uses Glock mags.
Sadly, I don't have access to the tools to finish an 80% lower, I have wanted to do that for a while.
TMD
Silent But Deadly
Posts: 1464
Joined: Mon Oct 08, 2012 10:35 am
Location: San Angelo, TX

Re: What other caliber to SBR?

Post by TMD »

tXr wrote:If I was to do a 9mm I think I would do one of these 80% lowers from NFA, https://newfrontierarmory.com/shop/c-9- ... tyle-mags/ uses Glock mags.
OK I gotta ask. Why in the world would someone want to SBR a 80% lower?
User avatar
tXr
Silent But Deadly
Posts: 1301
Joined: Thu Oct 16, 2014 10:59 am
Location: Behind Enemy Lines!

Re: What other caliber to SBR?

Post by tXr »

TMD wrote:
tXr wrote:If I was to do a 9mm I think I would do one of these 80% lowers from NFA, https://newfrontierarmory.com/shop/c-9- ... tyle-mags/ uses Glock mags.
OK I gotta ask. Why in the world would someone want to SBR a 80% lower?
People were talking about a 9mm build I wasn't really thinking about SBR at the moment I posted that, but why not, you have to engrave your lower already, so get the required name and town/state, assign/ engrave and then register a unique model and S/N, it is more involved than getting the 100% lower from New Frontier and SBR'ing it, but then again there is that option as well.
The only trustworthy Bolshevik is the Bolshevik taking a dirt nap
User avatar
idaho.jon
Silent But Deadly
Posts: 439
Joined: Tue Oct 21, 2014 10:47 pm
Location: Idaho

Re: What other caliber to SBR?

Post by idaho.jon »

golfindia wrote:
tXr wrote:If I was to do a 9mm I think I would do one of these 80% lowers from NFA, https://newfrontierarmory.com/shop/c-9- ... tyle-mags/ uses Glock mags.
I would like to know if these will fit in an Ares Armor jig.....

I've never been able to warm up to the glock mag style. Glock 30rd mags are an SOB to load the last 10 rds, and the aftermarket Korean ones i have don't always work well when full (feed lips don't hold the rounds securely). Factory glock 30rounders are expensive. Colt mags are easier to load and are always available for less than $20....
http://www.etsgroup.us/ETS-Group-Transl ... glk-18.htm

These have performed very well for me so far, I even load them without my maglula sometimes :mrgreen:
golfindia
Silent But Deadly
Posts: 1380
Joined: Thu Jun 20, 2013 1:16 pm

Re: What other caliber to SBR?

Post by golfindia »

TMD wrote:
tXr wrote:If I was to do a 9mm I think I would do one of these 80% lowers from NFA, https://newfrontierarmory.com/shop/c-9- ... tyle-mags/ uses Glock mags.
OK I gotta ask. Why in the world would someone want to SBR a 80% lower?
I gotta ask. What's the problem with SBRing an 80% lower?




.
User avatar
SwampDog_13
Silent But Deadly
Posts: 542
Joined: Wed Jan 13, 2016 2:15 pm
Location: NC swamp

Re: What other caliber to SBR?

Post by SwampDog_13 »

golfindia wrote:
TMD wrote:
tXr wrote:If I was to do a 9mm I think I would do one of these 80% lowers from NFA, https://newfrontierarmory.com/shop/c-9- ... tyle-mags/ uses Glock mags.
OK I gotta ask. Why in the world would someone want to SBR a 80% lower?
I gotta ask. What's the problem with SBRing an 80% lower?




.
I've always looked at the main reason to do a build off of an 80% lower, besides pride of doing it yourself, was to have an untraceable firearm. Once you file the form 1, that goes out the window.

Now that could just be my way of thinking but it's why I wouldn't sbr an 80.
TMD
Silent But Deadly
Posts: 1464
Joined: Mon Oct 08, 2012 10:35 am
Location: San Angelo, TX

Re: What other caliber to SBR?

Post by TMD »

golfindia wrote:
TMD wrote:
tXr wrote:If I was to do a 9mm I think I would do one of these 80% lowers from NFA, https://newfrontierarmory.com/shop/c-9- ... tyle-mags/ uses Glock mags.
OK I gotta ask. Why in the world would someone want to SBR a 80% lower?
I gotta ask. What's the problem with SBRing an 80% lower?




.

No problem with it at all. Guess my perception of 80% lowers is there is no serial number. That goes out the window when you SBR it. Also from what I've seen most quality 80% lowers cost as much or more than standard lowers. Factor in the cost of a jig and any savings just went out the window. Lastly if there's any issue with the lower being out of spec or any quality issues you're SOL.
golfindia
Silent But Deadly
Posts: 1380
Joined: Thu Jun 20, 2013 1:16 pm

Re: What other caliber to SBR?

Post by golfindia »

SwampDog_13 wrote:
I've always looked at the main reason to do a build off of an 80% lower, besides pride of doing it yourself, was to have an untraceable firearm. Once you file the form 1, that goes out the window.

Now that could just be my way of thinking but it's why I wouldn't sbr an 80.
To each their own, I suppose, but paying an FFL transfer fee and filling out a 4473 doesn't make your SBR any less "traceable" either.

I'll stand by my "because I can" argument :-)
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests