Filling out my form 1 they ask what caliber I put 300 right ??? for blackout.
So what do you answer as the unit of measure?
Trying to get it in before they do a 4am reboot for an hour.
Form 1 ??? 300 ?? Caliber??
Moderators: gds, bakerjw, renegade
- Chedr
- Silent But Deadly
- Posts: 764
- Joined: Tue Jul 30, 2013 10:10 pm
- Location: Pacific Northwest Washington
Re: Form 1 ??? 300 ?? Caliber??
Ok I am at step 2 of adding firearm on the form 1 and ...............
Product type: Short barreled rifle
Model: X15
Caliber: .................... should be 300 right?
Unit of measure: .....................????????????????? Caliber???-MM???
Product type: Short barreled rifle
Model: X15
Caliber: .................... should be 300 right?
Unit of measure: .....................????????????????? Caliber???-MM???
Re: Form 1 ??? 300 ?? Caliber??
People on here have used 300 blk or 308 is technically the caliber
Re: Form 1 ??? 300 ?? Caliber??
.308 or 7.62 is the caliber not 300
Re: Form 1 ??? 300 ?? Caliber??
Only use the decimal if you use 7.62 not 308
There's a tutorial on here somewhere
There's a tutorial on here somewhere
- BadKarmaZeroSix
- Silent But Deadly
- Posts: 2024
- Joined: Sun Jan 05, 2014 3:11 pm
- Location: NW Missouri
Re: Form 1 ??? 300 ?? Caliber??
My first stamp i entered 300 caliber and it worked fine...
"Of course I'm carrying a gun. It's where I keep my bullets".
- Chedr
- Silent But Deadly
- Posts: 764
- Joined: Tue Jul 30, 2013 10:10 pm
- Location: Pacific Northwest Washington
Re: Form 1 ??? 300 ?? Caliber??
Dang it! Drop down offered 300 so I used it.
Also used Caliber as the unit of measurement.
Hope it is good cause I pushed it through before 4AM EST which is when they reboot their system every Thursday.
Also used Caliber as the unit of measurement.
Hope it is good cause I pushed it through before 4AM EST which is when they reboot their system every Thursday.
Re: Form 1 ??? 300 ?? Caliber??
I used 300 and caliber. Worked fine, form approved. AAC MPW, was in the drop down. The tutorial I read said to use 300 not 308 for 300BLK.
- BadKarmaZeroSix
- Silent But Deadly
- Posts: 2024
- Joined: Sun Jan 05, 2014 3:11 pm
- Location: NW Missouri
Re: Form 1 ??? 300 ?? Caliber??
You're gonna be fine, chedr...glad you got it submitted...start marking off the days, man...last i checked, efiled form 1s were running 35-45 days...
"Of course I'm carrying a gun. It's where I keep my bullets".
- Chedr
- Silent But Deadly
- Posts: 764
- Joined: Tue Jul 30, 2013 10:10 pm
- Location: Pacific Northwest Washington
Re: Form 1 ??? 300 ?? Caliber??
Thanks BadKarmaZeroSix your confidence is relieving.BadKarmaZeroSix wrote:You're gonna be fine, chedr...glad you got it submitted...start marking off the days, man...last i checked, efiled form 1s were running 35-45 days...
I'm trying not to be all stressed out about doing this correctly. The wait is going to be tough so I'll be working on patience. I guess a form 4 and a suppressor is due next so I need all the patience practice I can get.
Hope you're enjoying your trip.
Who is online
Users browsing this forum: No registered users and 69 guests