Not only did this deal catch my eye, thought I'd share, but was wondering if anyone has one of these and what are your thoughts........Would like to do a 9mm Ar.....
http://palmettostatearmory.com/psa-16-c ... nd-ch.html
PSA 9MM UPPER
Moderators: gds, bakerjw, renegade
PSA 9MM UPPER
"Trust me...I know what I'm doing."
Re: PSA 9MM UPPER
https://www.quartercircle10.com/product/pistol-mur/
Considering how much some companies want for pistol upper receivers alone that is a cheap upper.
Stock up on the 9mm now because if Saw Mask Clinton is elected then the Firearms industry is going to get another surge in demand
Considering how much some companies want for pistol upper receivers alone that is a cheap upper.
Stock up on the 9mm now because if Saw Mask Clinton is elected then the Firearms industry is going to get another surge in demand
Industry Pro Staff for Dynamic Research Technologies When One Shot is All You Get www.drtammo.com https://www.facebook.com/drtammo/
Join the Revolution http://youtube.com/watch?v=3_Xnx3BFuLk
Join the Revolution http://youtube.com/watch?v=3_Xnx3BFuLk
Re: PSA 9MM UPPER
I have a old Olympic 9mm upper that I picked up around 1987 or so. It rides beside my bed full time, now!
The big question on the 9mm upper is what type of mag block are you going to use. Put another way, you have to decide what
type of magazines you are going to use and get a mag block to fit.
I remember I had a choice between Sten mags and Colt mags at the time, I had a bunch of Sten mags and went that route and
couldn't be happier. My feeds and shoots great. I think the longer barrel really adds some spunk to the 9mm.
Good luck and have fun!
The big question on the 9mm upper is what type of mag block are you going to use. Put another way, you have to decide what
type of magazines you are going to use and get a mag block to fit.
I remember I had a choice between Sten mags and Colt mags at the time, I had a bunch of Sten mags and went that route and
couldn't be happier. My feeds and shoots great. I think the longer barrel really adds some spunk to the 9mm.
Good luck and have fun!
Re: PSA 9MM UPPER
I went ahead and grabbed one!! I'm going to go with the Colt mags, and bought the mag block that they sell as well.
"Trust me...I know what I'm doing."
Re: PSA 9MM UPPER
Vent, I love my AR-15 chambered in 9mm. My wife enjoys it so much, we're making her one.
Mine is already SBR'd and suppressed. Hers will be as well.
Here's an early video without the suppressor, but with a slidefire stock on it:
http://vid29.photobucket.com/albums/c25 ... eojla4.mp4
Here's a video of it carving some pumpkins with the Octane 9mm suppressor (no slide fire action):
http://vid29.photobucket.com/albums/c25 ... f41ana.mp4
For 25-50 yards, it's hard to beat, IMHO.
Mine is already SBR'd and suppressed. Hers will be as well.
Here's an early video without the suppressor, but with a slidefire stock on it:
http://vid29.photobucket.com/albums/c25 ... eojla4.mp4
Here's a video of it carving some pumpkins with the Octane 9mm suppressor (no slide fire action):
http://vid29.photobucket.com/albums/c25 ... f41ana.mp4
For 25-50 yards, it's hard to beat, IMHO.
Re: PSA 9MM UPPER
I bought the 9mm rifle kit when it was on sale awhile back. It has functioned fine. The only complaint I have is the front sight was installed leaning to the left so far that I can't sight it in. I put a carry handle/sight on it and with it adjusted all the way left it still shoots about 6" to the right at 25 yards.
Re: PSA 9MM UPPER
So how do you finish that thing? I've got an SBRd lower sitting around, but I don't want to cram a mag block in the lower with a hammer, I'd like something I can switch back and forth.
I do not reply to posts with horrific grammar errors.
I do not reply to posts concerning the case mouth dent.
I do not reply to posts concerning the case mouth dent.
Re: PSA 9MM UPPER
DoubleJ wrote:So how do you finish that thing? I've got an SBRd lower sitting around, but I don't want to cram a mag block in the lower with a hammer, I'd like something I can switch back and forth.
I have a insertable "Sten mag" block to use with my 9mm upper. I used to swap uppers and put the block in, but over time acquired its own lower so it stays together now. As for as the block, it should be a "slip in" fit that is releasable by the regular mag catch. It has a separate lever to release the sten mags. I would think the other mag blocks would be similar, but not a guarantee.
Good Luck!
Re: PSA 9MM UPPER
Like sig said, there are drop in (or drop up) mag blocks. The bottom insert mag blocks from hahn, spikes and others are kept in place by set screws and are easily removable. They also provide bho. Top inserts do not. I run the spikes without issues.DoubleJ wrote:So how do you finish that thing? I've got an SBRd lower sitting around, but I don't want to cram a mag block in the lower with a hammer, I'd like something I can switch back and forth.
The biggest issue is that not all ar15 hammers work in a 9mm. My blackout has a giessele trigger/hammer. Won't work with the 9mm. That for me was enough reason to get a second (and soon third) sbr.
Who is online
Users browsing this forum: No registered users and 2 guests