Hey guys, I wanted you all to check out my page and our company Whiskey 3 Precision Systems LLC for the most stable and accurate rounds on the planet you can get for all your precision shooting needs....Especially guys in the 300 aac community with our flat base steel ballistic tip round! For our .30 caliber long range and benrest shooters we have the rebated boat tail that will send you above and beyond the competition!! Our ballistic coefficients make no comparison to the competition and are far superior!! Check us out....like and share!!
https://www.facebook.com/W3PrecisionSystems
and on the web at http://www.whiskey3precisionsystems.com
Whiskey 3 Precision Systems TAC-PM"™ 300 AAC Round
Moderators: gds, bakerjw, renegade
- Whiskey3Outdoors
- Member
- Posts: 39
- Joined: Sat Apr 19, 2014 1:55 am
- Location: Georgia
- Contact:
Whiskey 3 Precision Systems TAC-PM"™ 300 AAC Round
John Culpepper "U.S. Army Ret."
Whiskey 3 Precision Systems LLC
"High Speed - Low Drag Precision"™
[email protected]
www.whiskey3precisionsystems.com
Whiskey 3 Precision Systems LLC
"High Speed - Low Drag Precision"™
[email protected]
www.whiskey3precisionsystems.com
- randyrucker
- Silent But Deadly
- Posts: 2395
- Joined: Fri May 24, 2013 8:19 am
- Location: Georgia
Re: Whiskey 3 Precision Systems TAC-PM"™ 300 AAC Round
Looks very pointy. Are they just for target shooting or can they kill something ?
- Whiskey3Outdoors
- Member
- Posts: 39
- Joined: Sat Apr 19, 2014 1:55 am
- Location: Georgia
- Contact:
Re: Whiskey 3 Precision Systems TAC-PM"™ 300 AAC Round
Yes very pointy.....but to answer the question they can be used for either or. We already have guys in Alaska hunting with them and guys down South and in California using them on hogs with great results.
John Culpepper "U.S. Army Ret."
Whiskey 3 Precision Systems LLC
"High Speed - Low Drag Precision"™
[email protected]
www.whiskey3precisionsystems.com
Whiskey 3 Precision Systems LLC
"High Speed - Low Drag Precision"™
[email protected]
www.whiskey3precisionsystems.com
Re: Whiskey 3 Precision Systems TAC-PM"™ 300 AAC Round
Checked out your webpage. Is the TAC-PM FB bullet have a steel ballistic tip? As in armor piercing, no expansion whatsoever in meat?
- Whiskey3Outdoors
- Member
- Posts: 39
- Joined: Sat Apr 19, 2014 1:55 am
- Location: Georgia
- Contact:
Re: Whiskey 3 Precision Systems TAC-PM"™ 300 AAC Round
Yes on the steel ballistic tip. ....and yes it expands. It expands better than you think due to the larger more dense steel ballistic tip as opposed to a polymer tip on most other designs. It also is within ATF regs due to the correct weight ratio and type of steel used. Any fmj bullet if spun up high enough has the capability to penetrate steel but these arent designed for that. Would it be a light Armor round or could it be? Sure ....but it was designed for superior accuracy and nothing more.ncorry wrote:Checked out your webpage. Is the TAC-PM FB bullet have a steel ballistic tip? As in armor piercing, no expansion whatsoever in meat?
John Culpepper "U.S. Army Ret."
Whiskey 3 Precision Systems LLC
"High Speed - Low Drag Precision"™
[email protected]
www.whiskey3precisionsystems.com
Whiskey 3 Precision Systems LLC
"High Speed - Low Drag Precision"™
[email protected]
www.whiskey3precisionsystems.com
- AxleSlider
- Silent Operator
- Posts: 85
- Joined: Wed Jul 31, 2013 7:30 pm
Re: Whiskey 3 Precision Systems TAC-PM"™ 300 AAC Round
Interesting. Why don't you shoot it into a block of gel, or even better shoot it at a pig and post results. I'm interested. Make me more interested ...Whiskey3Outdoors wrote:Yes on the steel ballistic tip. ....and yes it expands. It expands better than you think due to the larger more dense steel ballistic tip as opposed to a polymer tip on most other designs. It also is within ATF regs due to the correct weight ratio and type of steel used. Any fmj bullet if spun up high enough has the capability to penetrate steel but these arent designed for that. Would it be a light Armor round or could it be? Sure ....but it was designed for superior accuracy and nothing more.ncorry wrote:Checked out your webpage. Is the TAC-PM FB bullet have a steel ballistic tip? As in armor piercing, no expansion whatsoever in meat?
- shootertom
- Silent But Deadly
- Posts: 209
- Joined: Mon Dec 18, 2006 5:48 pm
- Location: Mid-West
Re: Whiskey 3 Precision Systems TAC-PM"™ 300 AAC Round
Are you planning on selling any loaded rounds, or just projectiles for the time being?
- Whiskey3Outdoors
- Member
- Posts: 39
- Joined: Sat Apr 19, 2014 1:55 am
- Location: Georgia
- Contact:
Re: Whiskey 3 Precision Systems TAC-PM"™ 300 AAC Round
shootertom wrote:Are you planning on selling any loaded rounds, or just projectiles for the time being?
if a commercial reloader want to purchase them for reloading and reselling they are more than welcome to but at this time we have our hands full selling just the projectiles.
John Culpepper "U.S. Army Ret."
Whiskey 3 Precision Systems LLC
"High Speed - Low Drag Precision"™
[email protected]
www.whiskey3precisionsystems.com
Whiskey 3 Precision Systems LLC
"High Speed - Low Drag Precision"™
[email protected]
www.whiskey3precisionsystems.com
- Whiskey3Outdoors
- Member
- Posts: 39
- Joined: Sat Apr 19, 2014 1:55 am
- Location: Georgia
- Contact:
Re: Whiskey 3 Precision Systems TAC-PM"™ 300 AAC Round
AxleSlider wrote:Interesting. Why don't you shoot it into a block of gel, or even better shoot it at a pig and post results. I'm interested. Make me more interested ...Whiskey3Outdoors wrote:Yes on the steel ballistic tip. ....and yes it expands. It expands better than you think due to the larger more dense steel ballistic tip as opposed to a polymer tip on most other designs. It also is within ATF regs due to the correct weight ratio and type of steel used. Any fmj bullet if spun up high enough has the capability to penetrate steel but these arent designed for that. Would it be a light Armor round or could it be? Sure ....but it was designed for superior accuracy and nothing more.ncorry wrote:Checked out your webpage. Is the TAC-PM FB bullet have a steel ballistic tip? As in armor piercing, no expansion whatsoever in meat?
working on all the gel stuff and hog hunting effects ect as we speak and will be posted as soon as we can catch up enough to play in the woods and fine tune the R&D on Ballistics gel
John Culpepper "U.S. Army Ret."
Whiskey 3 Precision Systems LLC
"High Speed - Low Drag Precision"™
[email protected]
www.whiskey3precisionsystems.com
Whiskey 3 Precision Systems LLC
"High Speed - Low Drag Precision"™
[email protected]
www.whiskey3precisionsystems.com
Re: Whiskey 3 Precision Systems TAC-PM"™ 300 AAC Round
This is looking like a round that I will have to try out.
All work here as of late is getting to be too much.
not getting to the range to to work up a good load for my 8.2".
All work here as of late is getting to be too much.
not getting to the range to to work up a good load for my 8.2".
There's a time for compromise. It's called later.
Politically Correct;
A term used for Whiny, overly sensitive Pansies
who need everything Sugar- Coated for them.
Politically Correct;
A term used for Whiny, overly sensitive Pansies
who need everything Sugar- Coated for them.
Who is online
Users browsing this forum: No registered users and 24 guests