.....MosquitoArms wrote: I'm very fond of your KAK SB-15 pistol buffer tube.
What is the LOP with SB-15? I'm looking to achieve the same LOP (with spacers) as my Magpul CTR on 4th-5th notch out.
KAK INDUSTRY ITEMS
Moderators: gds, bakerjw, renegade
-
- Silent But Deadly
- Posts: 209
- Joined: Sun Jul 06, 2014 7:08 am
- Location: Central Texas
Re: KAK INDUSTRY ITEMS
-
- Silent But Deadly
- Posts: 235
- Joined: Sat Aug 17, 2013 11:44 pm
Re: KAK INDUSTRY ITEMS
If u want notch 4-5 get the LAK length adjustment and it will be a perfect matchMosquitoArms wrote:.....MosquitoArms wrote: I'm very fond of your KAK SB-15 pistol buffer tube.
What is the LOP with SB-15? I'm looking to achieve the same LOP (with spacers) as my Magpul CTR on 4th-5th notch out.
-
- Silent But Deadly
- Posts: 209
- Joined: Sun Jul 06, 2014 7:08 am
- Location: Central Texas
Re: KAK INDUSTRY ITEMS
Would I need to put on both extension rings from the kit (1.2" and .6")?
Thanks again! I'm trying to get a future pistol project planned.
Thanks again! I'm trying to get a future pistol project planned.
-
- Silent But Deadly
- Posts: 235
- Joined: Sat Aug 17, 2013 11:44 pm
Re: KAK INDUSTRY ITEMS
MosquitoArms wrote:Would I need to put on both extension rings from the kit (1.2" and .6")?
Thanks again! I'm trying to get a future pistol project planned.
notch 4-5 would be the large ring by itself..
-
- Silent But Deadly
- Posts: 209
- Joined: Sun Jul 06, 2014 7:08 am
- Location: Central Texas
Re: KAK INDUSTRY ITEMS
kakindustry wrote:MosquitoArms wrote:Would I need to put on both extension rings from the kit (1.2" and .6")?
Thanks again! I'm trying to get a future pistol project planned.
notch 4-5 would be the large ring by itself..
Roger that!!
BTW, is this your "peanut fluted" pistol buffer tube on the Aero Precision 7.5" PDW build? Such an aesthetically-pleasing build
-
- Silent But Deadly
- Posts: 235
- Joined: Sat Aug 17, 2013 11:44 pm
Re: KAK INDUSTRY ITEMS
MosquitoArms wrote:kakindustry wrote:Yes that's our "gen 2" with the peanut flutingMosquitoArms wrote:Would I need to put on both extension rings from the kit (1.2" and .6")?
Thanks again! I'm trying to get a future pistol project planned.
notch 4-5 would be the large ring by itself..
Roger that!!
BTW, is this your "peanut fluted" pistol buffer tube on the Aero Precision 7.5" PDW build? Such an aesthetically-pleasing build
-
- Silent But Deadly
- Posts: 235
- Joined: Sat Aug 17, 2013 11:44 pm
Re: KAK INDUSTRY ITEMS
Pink braces on super sale.. Build one for your lady or grab an extra to keep an extra pistol lower in the safe..
http://www.kakindustry.com/sb-15-brace-pink
http://www.kakindustry.com/sb-15-brace-pink
-
- Silent But Deadly
- Posts: 235
- Joined: Sat Aug 17, 2013 11:44 pm
-
- Silent But Deadly
- Posts: 235
- Joined: Sat Aug 17, 2013 11:44 pm
- r.tenorio671
- Silent But Deadly
- Posts: 1180
- Joined: Thu Aug 07, 2014 6:41 am
Re: KAK INDUSTRY ITEMS
Kurt,
Just got my order of Super Tubes and installed the new SBX on newest build. LOP between it and the original SB-15 is the same, but due the shorter OAL of the SBX's mounting tube, there is a gap between the shoulder of of the Super Tube and the front end of the brace. The rear end of the SBX is closed, unlike the open end of the SB-15 so forward movement of the SBX is checked by the rear end of the buffer tube.
The gap is just slightly smaller than the small LOP adjustment ring of the Super Tubes adjustment kit, but if someone wanted to "close" that gap for aesthetic reasons, it would do the job & have very minimal space between the closed end of the SBX and the end of the buffer tube.
Not complaining, it's no problem for me, but it did give me an idea about a ring that has a built in QD port for single point sling use, i.e., on each side. Better yet, a single port on underside 6 o`clock position so switching from strong side to weak side mounting would have no sling binding. The current LOP adjustment rings is sufficiently sized so free rotation is possible as long as the Super Tubes shoulder and front end of the brace are not snug up against it..... just a thought
Happy Holidays to you and yours and staff!
Just got my order of Super Tubes and installed the new SBX on newest build. LOP between it and the original SB-15 is the same, but due the shorter OAL of the SBX's mounting tube, there is a gap between the shoulder of of the Super Tube and the front end of the brace. The rear end of the SBX is closed, unlike the open end of the SB-15 so forward movement of the SBX is checked by the rear end of the buffer tube.
The gap is just slightly smaller than the small LOP adjustment ring of the Super Tubes adjustment kit, but if someone wanted to "close" that gap for aesthetic reasons, it would do the job & have very minimal space between the closed end of the SBX and the end of the buffer tube.
Not complaining, it's no problem for me, but it did give me an idea about a ring that has a built in QD port for single point sling use, i.e., on each side. Better yet, a single port on underside 6 o`clock position so switching from strong side to weak side mounting would have no sling binding. The current LOP adjustment rings is sufficiently sized so free rotation is possible as long as the Super Tubes shoulder and front end of the brace are not snug up against it..... just a thought
Happy Holidays to you and yours and staff!
Who is online
Users browsing this forum: No registered users and 8 guests