That is beautiful. How about more details...color, is it duracoat or ? Cmon man you just can't put something like that up there and not give us all the skinny...
edit...Ok, went to the Aero site and saw that it's cerocoat. what barrel did you use or did you get a complete upper? What did you do about engraving the lower?
Let's see your 8 inchers
Moderators: gds, bakerjw, renegade
-
- Member
- Posts: 46
- Joined: Tue Jun 03, 2014 9:41 am
- Location: Georgia
Re: Let's see your 8 inchers
dtom29 wrote:That is beautiful. How about more details...color, is it duracoat or ? Cmon man you just can't put something like that up there and not give us all the skinny...
edit...Ok, went to the Aero site and saw that it's cerocoat. what barrel did you use or did you get a complete upper? What did you do about engraving the lower?
I bought all the parts for this before Aero offered the complete upper. Here is the list:
Aero COP carbine length upper, 8" 300BLK barrel
Silencerco specwar trifecta flash hider (silencer is still in jail)
V7 titanium gas block, ultra-light ejection port cover, gas tube
SWFA raptor charging handle
RRA BCG microslicked
Aero pew lower
CMC 3.5 trigger
V7 ambi safety, titanium takedown/pivot pins, buffer retainer and spring, endplate, castle nut, mag catch
Phase 5 bolt release, Hex2 pistol buffer
Magpul K2 grip, trigger guard
Eotech XPS2
All the Burnt Bronze Cerakote was done by Weapon Works LLC in North Carolina
I feel like I'm forgetting something.
This is my wife's and she didn't want to color fill.
Re: Let's see your 8 inchers
Love the picture layout.
You did a great job on the weapon. It's just my flavor.
How did you get the clouds in the shot at the right time and place......
Back ground is great.
There's a time for compromise. It's called later.
Politically Correct;
A term used for Whiny, overly sensitive Pansies
who need everything Sugar- Coated for them.
Politically Correct;
A term used for Whiny, overly sensitive Pansies
who need everything Sugar- Coated for them.
-
- Member
- Posts: 46
- Joined: Tue Jun 03, 2014 9:41 am
- Location: Georgia
Re: Let's see your 8 inchers
It was raining at the range that day and my buddy shot the photo. He has a better eye for that stuff than I do.
Re: Let's see your 8 inchers
Tell him he has a great eye for layout. Two thumbs up.
Shoot on
Shoot on
There's a time for compromise. It's called later.
Politically Correct;
A term used for Whiny, overly sensitive Pansies
who need everything Sugar- Coated for them.
Politically Correct;
A term used for Whiny, overly sensitive Pansies
who need everything Sugar- Coated for them.
Re: Let's see your 8 inchers
Gotta put something in there when its not on my wrist
Law-guns 8" 300BLK
The path to true knowledge is paved with wasted money
Re: Let's see your 8 inchers
STI Upper+Lower
KAK 8" 300 BLK Barrel
KAK Gen 2 Buffer Tube+buffer+spring
KAK Grip+triggerguard+forward assist+dust cover+charging handle+muzzle device+gas system
BCM Bolt Carrier Group
DPMS LPK
Magpul BAD Lever
Magpul ASAP
YHM Takedown Pins
UTG Pro Superslim 9" handguard
SB15 Pistol Brace
Primary Arms Red Dot + Fortis mount
KAK 8" 300 BLK Barrel
KAK Gen 2 Buffer Tube+buffer+spring
KAK Grip+triggerguard+forward assist+dust cover+charging handle+muzzle device+gas system
BCM Bolt Carrier Group
DPMS LPK
Magpul BAD Lever
Magpul ASAP
YHM Takedown Pins
UTG Pro Superslim 9" handguard
SB15 Pistol Brace
Primary Arms Red Dot + Fortis mount
-
- Silent But Deadly
- Posts: 184
- Joined: Wed Aug 14, 2013 1:55 pm
Re: Let's see your 8 inchers
Heres my concealed fellas!
BAHAHAH jk, but technically I could.
8" Law-guns barrel on a Aero Precision pistol. Sig-brace with Kak buffertube and extensions, affixed with a HTA Kestrel 308.
Shoots great for a $100 barrel!
Heres some Barnes Tac-tx 110gr over 19.0gr Hodgdon H110 seated @ C.O.L=2.130"
http://www.silencertalk.com/forum/viewt ... 4&t=130262
BAHAHAH jk, but technically I could.
8" Law-guns barrel on a Aero Precision pistol. Sig-brace with Kak buffertube and extensions, affixed with a HTA Kestrel 308.
Shoots great for a $100 barrel!
Heres some Barnes Tac-tx 110gr over 19.0gr Hodgdon H110 seated @ C.O.L=2.130"
http://www.silencertalk.com/forum/viewt ... 4&t=130262
Re: Let's see your 8 inchers
Mine
8" Sota barrel 1/8 twist
Anderson upper/lower
AIM black nitride BCG
KAC pistol tube and Sig brace
9"Samson keymod handguard
BCM MOD 3 grip
Spikes barking spider with dynacomp
BAD-ASS 45 safety
KNS gen 2 mod st
Sekins mag release and bolt release and trigger guard
mil spec charging handle and trigger with JP enhanced relibilty spring kit
8" Sota barrel 1/8 twist
Anderson upper/lower
AIM black nitride BCG
KAC pistol tube and Sig brace
9"Samson keymod handguard
BCM MOD 3 grip
Spikes barking spider with dynacomp
BAD-ASS 45 safety
KNS gen 2 mod st
Sekins mag release and bolt release and trigger guard
mil spec charging handle and trigger with JP enhanced relibilty spring kit
Stamp collecting since 2015
Who is online
Users browsing this forum: No registered users and 14 guests