Anybody have a load recipe I can use to get me in the ballpark?
I have a Savage 16" 300blk bolt gun and want to make some 90gr xtp loads for it.
I cant find Trailboss anywhere and have seen where people have recommended Unique for light grain single shot subs.
Just hoping somebody may have a proven safe starting point.
I will be using some once fired 300blk Gemtech or Nosler brass for the loads and CCI 400 primers.
Thanks in advance.
90 Gr XTP Sub load using Unique ?
Moderators: gds, bakerjw, renegade, bamachem
90 Gr XTP Sub load using Unique ?
Last edited by kscoggins on Fri Oct 16, 2015 5:07 pm, edited 1 time in total.
Re: 90 Gr XTP Sub load using Unique ?
SVH just asked about this earlier, and I directed him to this thread....
viewtopic.php?f=141&t=83248
viewtopic.php?f=141&t=83248
- Steve Urquell
- Silent But Deadly
- Posts: 221
- Joined: Tue Nov 11, 2014 10:53 pm
Re: 90 Gr XTP Sub load using Unique ?
Quoting me from another thread:kscoggins wrote:Anybody have a load recipe I can use to get me in the ballpark?
I have a Savage 16" 300blk bolt gun and want to make some 90gr xtp loads for it.
I can find Trailboss anywhere and have seen where people have recommended Unique for light grain single shot subs.
Just hoping somebody may have a proven safe starting point.
I will be using some once fired 300blk Gemtech or Nosler brass for the loads and CCI 400 primers.
Thanks in advance.
Finally found a 90gr XTP Unique load that my CVA Scout likes. It took a bunch of messing around but I played around with different powder weights and length till I got it. All the groups below are 3.4gr Unique (Chrono'ed at 964fps) with different lengths except the shortest two, where one of those got run thru the Lee FCD set at 1/4 turn. Looks like the crimp helped so I may load up some at 1.647 COAL and hit them with the FCD.
Interestingly, my rifle shoots 5 different bullets to center except these. It shoots them 2" right with every load. I'm gonna load up a bunch and rezero my scope to hit POA at 50yds.
Re: 90 Gr XTP Sub load using Unique ?
Here's mine:
90 grain XTP
4.4 Unique
COAL 1.74
Converted Range pick ups
CCI 400
No crimp
1001fps average. RARR suppressed.
My groups at 50yds were at 1". Also, my POI was nearly identical at that same range with my 208 AMAX load for that same rifle.
90 grain XTP
4.4 Unique
COAL 1.74
Converted Range pick ups
CCI 400
No crimp
1001fps average. RARR suppressed.
My groups at 50yds were at 1". Also, my POI was nearly identical at that same range with my 208 AMAX load for that same rifle.
- Steve Urquell
- Silent But Deadly
- Posts: 221
- Joined: Tue Nov 11, 2014 10:53 pm
Re: 90 Gr XTP Sub load using Unique ?
My buddy dropped by to try out his new Silencerco Omega 7.62 and we shot some of my XTPs thru it. Here's the video. The slo-mo on his phone messed with the sound but you can tell his voice is as loud as the shot. The shot actually sounds like a low cough--not even a hard cough.
The bullet hitting the jug in the second one was 3X louder than the shot at the muzzle.
The bullet hitting the jug in the second one was 3X louder than the shot at the muzzle.
Re: 90 Gr XTP Sub load using Unique ?
Thanks for the info gentlemen, can't wait to try these out.
Re: 90 Gr XTP Sub load using Unique ?
Wow, loaded a few last night and it is a very significant difference in sound between lil gun subs and unique subs.
Hopefully I will have enough time to chrono a few and see where my charge weight needs to be.
Thanks
Any tips of getting the little 90gr bullet to start straight when seating it ?
Thanks !
Hopefully I will have enough time to chrono a few and see where my charge weight needs to be.
Thanks
Any tips of getting the little 90gr bullet to start straight when seating it ?
Thanks !
-
- Senior Silent Operator
- Posts: 144
- Joined: Mon Oct 12, 2015 11:33 am
- Location: San Antonio, Texas
Re: 90 Gr XTP Sub load using Unique ?
What kind of accuracy are yall geting at 100 yds with the 90gr xtp?
- Steve Urquell
- Silent But Deadly
- Posts: 221
- Joined: Tue Nov 11, 2014 10:53 pm
Re: 90 Gr XTP Sub load using Unique ?
I use the Lee universal expanding die on mine.kscoggins wrote:Wow, loaded a few last night and it is a very significant difference in sound between lil gun subs and unique subs.
Hopefully I will have enough time to chrono a few and see where my charge weight needs to be.
Thanks
Any tips of getting the little 90gr bullet to start straight when seating it ?
Thanks !
- cwlongshot
- Silent But Deadly
- Posts: 1128
- Joined: Sat Oct 18, 2014 7:53 pm
- Location: Connecticut
Re: 90 Gr XTP Sub load using Unique ?
Buy yourself a Lyman M die.kscoggins wrote:Wow, loaded a few last night and it is a very significant difference in sound between lil gun subs and unique subs.
Hopefully I will have enough time to chrono a few and see where my charge weight needs to be.
Thanks
Any tips of getting the little 90gr bullet to start straight when seating it ?
Thanks !
I haven't had good luck with Unique or Trail boss in my 90g loads... I loaded up some the other day with 4759 and had more consistent groups, but still not great. 1" at 50 yards. I have more work to do in this regard.
CW
A Bolt, Single Shot and a few M$Rs
Join me on RUMBLE! Https://rumble.com/user/cwlongshot
https://youtube.com/channel/UCBOIIvlk30qD5a7xVLfmyfw
I PROUDLY SUPPORT LAW ENFORCEMENT & OUR TROOPS
Join me on RUMBLE! Https://rumble.com/user/cwlongshot
https://youtube.com/channel/UCBOIIvlk30qD5a7xVLfmyfw
I PROUDLY SUPPORT LAW ENFORCEMENT & OUR TROOPS
Who is online
Users browsing this forum: Bing [Bot] and 129 guests