How much do those MBC 245's actually weigh?dpkirksey wrote:I have been testing these Missouri Bullet Company 245gr lead w/polytech coating. Using 8.5 grains of H110 powder, CCI 450 primers, and an OAL of 2.225". I was able to achieve a 30 shot average of 1010fps with a spread of 57fps, grouping 1.04" at 50 yards. All testing was performed with a Remington SPS 300 AAC Blackout rifle with a 16" barrel. Best of luck going forward.
Need load data for Missouri Bullet 245g for blackout
Moderators: gds, bakerjw, renegade, bamachem
-
Dolomite_Supafly
- Silent But Deadly
- Posts: 3017
- Joined: Fri Oct 30, 2009 7:03 am
- Location: East Tennessee
- Contact:
Re: Need load data for Missouri Bullet 245g for blackout
WWW.thegunmilitia.com
Come join the militia!
Come join the militia!
Re: Need load data for Missouri Bullet 245g for blackout
Their website says 238 grs at 20 bhn
Re: Need load data for Missouri Bullet 245g for blackout
I'm looking for a reliable load to shoot these 245gr bullets out of a 10.5" unsuppressed barrel with a pistol length gas tube.
New Guy to 300 blk.
Looking for hard hitting close in (100 yds or less) load. I ended up with about 500 of the MBC bullets in a trade.
Seeing that OAL is one of the most important considerations.
Thanks for your advice; John
New Guy to 300 blk.
Looking for hard hitting close in (100 yds or less) load. I ended up with about 500 of the MBC bullets in a trade.
Seeing that OAL is one of the most important considerations.
Thanks for your advice; John
Who is online
Users browsing this forum: No registered users and 162 guests