This thread is a compilation of "Pet Loads" that others have contributed for publication. No chat and no discussion of loads. You can provide a link in your post for the "workup" of the load if you choose to post one.
Any loads listed are what have worked for others, but does not mean that they will work for you or your specific firearm. Pet Loads are NOT a shortcut nor a quick and cheap way to escape the sometimes tedious task of load development. Load development means starting with a LOWER powder charge and working up to that "Pet Load" in a safe and methodical manner, always checking for signs of overpressure along the way. NEVER take a "Pet Load" and use it as a starting point.
In order to be considered for publication, you can submit your information in the following format:
Rifle Used
Barrel Maker, Contour, Gas Length/Port Size (if known)
Barrel Length and Twist
Magazine Brand/Size
Bullet Used (grain, manufacturer, type)
Powder Charge and Brand
Case Used
Primer Used
COAL
Chronograph Velocity, if known or manual velocity, if known.
Any issues or problems, Failure to Fire, Failure to Feed, Failure to Eject, etc. Keep it short.
Link to your "workup" thread
This is an example of a load that I worked up in my AR:
AR15
AR Stoner, Med Contour, Carbine
16", 1:8 5R
MagPul PMAG, 30RD & Custom 10RD (cut down 30RD mag)
110 gr Hornady V-Max
19.6gr Hodgdon Lil'Gun
LC 5.56, reformed to 300BLK
CCI 450 Small Mag
2.10"
2350 FPS (estimated, manual)
Zero Issues so far. All feed, fire, and eject fine.
N/A
Please ensure that your load info is in this format when submitted. Any loads that are incomplete are subject to deletion at any time.
Again, no chat or discussion allowed. Chat and discussion should be done in your individual "workup" thread that you link to.
Thanks!
Load Catalog: Supersonic H110, 110gr through 150gr
Moderators: gds, bakerjw, renegade, bamachem
- oldpapps
- Silent But Deadly
- Posts: 262
- Joined: Sun Feb 19, 2012 1:47 am
- Location: Mid America Missouri
Re: Load Catalog: Supersonic H110, 110gr through 150gr
Rifle Used:
DSA ZM4 Forged 7075T6 A3 AR15 Upper Receiver; 300AAC, ZM4/AR15 Semi Auto Bolt Group
Barrel Maker, Contour, Gas Length/Port Size:
DSA, - , Carbine/UNK
Barrel Length and Twist:
16inch SS, 1 in 8
Magazine Brand/Size:
10 round GI metal
Bullet Used (grain, manufacturer, type):
110 grain, Hornady V-Max
Powder Charge and Brand:
H110, 19.0 grains
Case Used:
REM, 300 AAC head stamped
Primer Used:
CCI 400 and Rem factory primers
COAL:
2.000 inches
Chronograph Velocity:
Average of 2302 FPS, 25 shots at 10 feet.
Any issues or problems, Failure to Fire, Failure to Feed, Failure to Eject, etc:
Full function all rounds, 5 rounds per set, lock-back on last round from mag. No signs of excess pressure.
Testing completed on 5/8/2012
With care,
OSOK
Keyword Catalog Code: LC-H110-110-SP
DSA ZM4 Forged 7075T6 A3 AR15 Upper Receiver; 300AAC, ZM4/AR15 Semi Auto Bolt Group
Barrel Maker, Contour, Gas Length/Port Size:
DSA, - , Carbine/UNK
Barrel Length and Twist:
16inch SS, 1 in 8
Magazine Brand/Size:
10 round GI metal
Bullet Used (grain, manufacturer, type):
110 grain, Hornady V-Max
Powder Charge and Brand:
H110, 19.0 grains
Case Used:
REM, 300 AAC head stamped
Primer Used:
CCI 400 and Rem factory primers
COAL:
2.000 inches
Chronograph Velocity:
Average of 2302 FPS, 25 shots at 10 feet.
Any issues or problems, Failure to Fire, Failure to Feed, Failure to Eject, etc:
Full function all rounds, 5 rounds per set, lock-back on last round from mag. No signs of excess pressure.
Testing completed on 5/8/2012
With care,
OSOK
Keyword Catalog Code: LC-H110-110-SP
Re: Load Catalog: Supersonic H110, 110gr through 150gr
AR15
Noveke, Carbine
16", 1:8
MagPul PMAG 30RD & 20RD Lancer
150gr Hornady FMJBT
16.5gr H110
LC 5.56, reformed to 300BLK
Remington 7 1/2 Small Rifle
2.100"
Lightened carbine buffer
Unknown velocity
Zero Issues so far. All feed, fire, and eject fine. BHO as well.
N/A
Keyword Catalog Code: LC-H110-150-SP
Noveke, Carbine
16", 1:8
MagPul PMAG 30RD & 20RD Lancer
150gr Hornady FMJBT
16.5gr H110
LC 5.56, reformed to 300BLK
Remington 7 1/2 Small Rifle
2.100"
Lightened carbine buffer
Unknown velocity
Zero Issues so far. All feed, fire, and eject fine. BHO as well.
N/A
Keyword Catalog Code: LC-H110-150-SP
Addicted to the silence.
- armed_zebra
- Silent But Deadly
- Posts: 172
- Joined: Tue Jun 21, 2011 12:39 pm
- Location: Louisiana
Re: Load Catalog: Supersonic H110, 110gr through 150gr
1:8 twist 8" Noveske barreled AR-15 SBR
Carbine buffer and spring
Magpul 30 and 20 round pmags
125 Speer TNT seated to 2.050"
19.2 grains of H110
LC reformed brass trimmed to 1.358"
CCI 400 Small Rifle Primer
2040fps average
complete function with or without AAC SDN-6 suppressor
Keyword Catalog Code: LC-H110-150-SP
Carbine buffer and spring
Magpul 30 and 20 round pmags
125 Speer TNT seated to 2.050"
19.2 grains of H110
LC reformed brass trimmed to 1.358"
CCI 400 Small Rifle Primer
2040fps average
complete function with or without AAC SDN-6 suppressor
Keyword Catalog Code: LC-H110-150-SP
Silence can not be misquoted.
-
- Member
- Posts: 12
- Joined: Thu Nov 08, 2012 8:15 am
Re: Load Catalog: Supersonic H110, 110gr through 150gr
AR-15 16" 1:8 Wilson Combat Barrel
Redding Competition Die set with roll crimp
Loaded on a Dillon 650
125 Sierra OTM
LCD Brass
Remington 7 1/2 Primer
2.230" OAL
17.7 Gr H110
2170 FPS @ 69 degrees
Grouped @ .61"
Best load I've yet tested. No pressure signs
Redding Competition Die set with roll crimp
Loaded on a Dillon 650
125 Sierra OTM
LCD Brass
Remington 7 1/2 Primer
2.230" OAL
17.7 Gr H110
2170 FPS @ 69 degrees
Grouped @ .61"
Best load I've yet tested. No pressure signs
-
- Silent Operator
- Posts: 53
- Joined: Mon Feb 18, 2013 2:14 pm
Re: Load Catalog: Supersonic H110, 110gr through 150gr
AR-15
CMMG
16" Flat Top Upper 1:8 Twist
MagPul P-MAG 30 Magview
147gr Pulled M-80 from Pats Reloading
Seated to cannelure
Crimped with Lee FCD
H110 - 16.4gr
Converted 5.56 - FC 06 headstamp
Winchester Small Rifle STD
2.135" OAL
5 shot group - chrony 15' from barrel:
Low: 1845.83
High: 1989.31
AVG: 1929.71
S.D.: 53.29
No issues with functioning. Shooting into berm just past chrony, so no accuracy info.
No pressure indicators until 16.6gr H110
EDIT: Added COAL
CMMG
16" Flat Top Upper 1:8 Twist
MagPul P-MAG 30 Magview
147gr Pulled M-80 from Pats Reloading
Seated to cannelure
Crimped with Lee FCD
H110 - 16.4gr
Converted 5.56 - FC 06 headstamp
Winchester Small Rifle STD
2.135" OAL
5 shot group - chrony 15' from barrel:
Low: 1845.83
High: 1989.31
AVG: 1929.71
S.D.: 53.29
No issues with functioning. Shooting into berm just past chrony, so no accuracy info.
No pressure indicators until 16.6gr H110
EDIT: Added COAL
Last edited by AnotherMadHatter on Tue Feb 19, 2013 12:37 am, edited 1 time in total.
Re: Load Catalog: Supersonic H110, 110gr through 150gr
125gr speer TNT
17gr H110 : 2035 2048 2070
18gr H110 : 2086 2085 2100 2129
19gr H110 : 2136 2214 2207 2214
15.7 LilGun: 1999 2057 2041 2076 2070
I noticed one thing, after every shot velocity goes up, I'm assuming the barrel gets warmer and warmer.
I did't mess with checking for best grouping since it was windy as hell. I guess we'll try that next weekend.
16'' barrel, cci primers, LC brass, 30rd pmags, 2.08 OAL
17gr H110 : 2035 2048 2070
18gr H110 : 2086 2085 2100 2129
19gr H110 : 2136 2214 2207 2214
15.7 LilGun: 1999 2057 2041 2076 2070
I noticed one thing, after every shot velocity goes up, I'm assuming the barrel gets warmer and warmer.
I did't mess with checking for best grouping since it was windy as hell. I guess we'll try that next weekend.
16'' barrel, cci primers, LC brass, 30rd pmags, 2.08 OAL
-
- Member
- Posts: 22
- Joined: Sun Feb 05, 2012 10:04 am
Re: Load Catalog: Supersonic H110, 110gr through 150gr
Rifle Used
Spikes Lower, Mil-Spec Trigger Group (DPMS), AAC 16" Upper
Barrel Maker, Contour, Gas Length/Port Size (if known)
AAC
Barrel Length and Twist
1:7 Twist 16"
Magazine Brand/Size
Magpul & Colt GI (both 20 round)... the magpuls won't lock back on last round in any rifle)
Bullet Used (grain, manufacturer, type)
Hornady #3020, 130g SP
Powder Charge and Brand
WW296, 18.5g
Case Used
Hornady (new first firing)
Primer Used
CCI400
COAL
2.010"
Chronograph Velocity
5 shots: 2159, 2182, 2182, 2181, 2160 Avg: 2173 fps
Any issues or problems
No issues, perfect 12" ejection pile
5 shot group: .65" (measured edge to edge minus .30) 1 round ragged hole in target
(same as the Nosler 125g & same POI)... odd to me, but I'll take it!!
Spikes Lower, Mil-Spec Trigger Group (DPMS), AAC 16" Upper
Barrel Maker, Contour, Gas Length/Port Size (if known)
AAC
Barrel Length and Twist
1:7 Twist 16"
Magazine Brand/Size
Magpul & Colt GI (both 20 round)... the magpuls won't lock back on last round in any rifle)
Bullet Used (grain, manufacturer, type)
Hornady #3020, 130g SP
Powder Charge and Brand
WW296, 18.5g
Case Used
Hornady (new first firing)
Primer Used
CCI400
COAL
2.010"
Chronograph Velocity
5 shots: 2159, 2182, 2182, 2181, 2160 Avg: 2173 fps
Any issues or problems
No issues, perfect 12" ejection pile
5 shot group: .65" (measured edge to edge minus .30) 1 round ragged hole in target
(same as the Nosler 125g & same POI)... odd to me, but I'll take it!!
Last edited by NA_Wreckdiver on Wed Mar 20, 2013 9:04 am, edited 1 time in total.
-
- Member
- Posts: 22
- Joined: Sun Feb 05, 2012 10:04 am
Re: Load Catalog: Supersonic H110, 110gr through 150gr
Rifle Used
Spikes Lower, Mil-Spec Trigger Group (DPMS), AAC 16" Upper
Barrel Maker, Contour, Gas Length/Port Size (if known)
AAC
Barrel Length and Twist
1:7 Twist 16"
Magazine Brand/Size
Magpul & Colt GI (both 20 round)... the magpuls won't lock back on last round in any rifle)
Bullet Used (grain, manufacturer, type)
Nosler #30125, 125g BT (green tip)
Powder Charge and Brand
WW296, 17.5g
Case Used
Hornady (new first firing)
Primer Used
CCI400
COAL
2.075"
Chronograph Velocity
5 shots: 2130, 2123, 2148, 2139, *Error* Avg: 2135 fps (4 shots)
Any issues or problems
No issues, perfect 12" ejection pile
5 shot group: .65" (measured edge to edge minus .30) 1 round ragged hole in target
(same as the Hornady 130g & same POI)... odd to me, but I'll take it!!
Spikes Lower, Mil-Spec Trigger Group (DPMS), AAC 16" Upper
Barrel Maker, Contour, Gas Length/Port Size (if known)
AAC
Barrel Length and Twist
1:7 Twist 16"
Magazine Brand/Size
Magpul & Colt GI (both 20 round)... the magpuls won't lock back on last round in any rifle)
Bullet Used (grain, manufacturer, type)
Nosler #30125, 125g BT (green tip)
Powder Charge and Brand
WW296, 17.5g
Case Used
Hornady (new first firing)
Primer Used
CCI400
COAL
2.075"
Chronograph Velocity
5 shots: 2130, 2123, 2148, 2139, *Error* Avg: 2135 fps (4 shots)
Any issues or problems
No issues, perfect 12" ejection pile
5 shot group: .65" (measured edge to edge minus .30) 1 round ragged hole in target
(same as the Hornady 130g & same POI)... odd to me, but I'll take it!!
Re: Load Catalog: Supersonic H110, 110gr through 150gr
Custom built mutt AR
16" Noveske 1:7, pistol gas w/ adjustable gas
Magpul magazine
Hornady 125 SST bullets (measured projectile length roughly 1.040")
H-110 powder
CCI400 primers
COL: 2.115" (allows use of provided cannelure)
Brass: LC brass from Bradswarehouse (avg measured fired volume 24.3gr of water) trimmed to 1.352"
Used Lee Factory Crimping Die
My QuickLOAD program produced the below estimated values:
Powder Load (gr) est. muz velocity (fps) est. max pressure (psi)
15.6----------------1875---------------------32910
16.0----------------1920---------------------35284
16.4----------------1966---------------------37835
16.8----------------2011---------------------40579
17.0----------------2033---------------------42028
17.2----------------2056---------------------42531
17.4----------------2078---------------------45092
17.6----------------2100---------------------46712
17.8----------------2123---------------------48395
18.0----------------2145---------------------50142
Actual measured velocities at 45F outside, at a distance of approx 5yds from chrony. Each loading was done with 4 rounds. Chrony being used was a Cabela's Beta Chrono.
Powder Load (gr) velocity (fps)
15.6----------------1870, 1998, 1877, 1880
16.0----------------1878, 1911, 1936, 1960
16.4----------------1943, error, 2060, 2007
16.8----------------2054, 2011, 2024, 2011
17.0----------------2096, 2115, 2085, 2061
17.2----------------2052, 2066, 2059, 2138
17.4----------------2048, 2128, error, error
17.6----------------2155, 2062, 2085, 2192
17.8----------------2107, 2120, error, 2110
18.0----------------2100, 2114, 2159, 2148
I saw no visible pressure signed in any of these loadings.
I ran the 17.8gr loads again @ 90F, and was very impressed. Average of 5 rounds was 2148fps and ES was less than 20fps through 5 rounds. ***(7/20/13)shot these rounds again today at 90F and these suckers are flying even faster at 2200fps. No pressure signs but dang, not sure why the increase.
16" Noveske 1:7, pistol gas w/ adjustable gas
Magpul magazine
Hornady 125 SST bullets (measured projectile length roughly 1.040")
H-110 powder
CCI400 primers
COL: 2.115" (allows use of provided cannelure)
Brass: LC brass from Bradswarehouse (avg measured fired volume 24.3gr of water) trimmed to 1.352"
Used Lee Factory Crimping Die
My QuickLOAD program produced the below estimated values:
Powder Load (gr) est. muz velocity (fps) est. max pressure (psi)
15.6----------------1875---------------------32910
16.0----------------1920---------------------35284
16.4----------------1966---------------------37835
16.8----------------2011---------------------40579
17.0----------------2033---------------------42028
17.2----------------2056---------------------42531
17.4----------------2078---------------------45092
17.6----------------2100---------------------46712
17.8----------------2123---------------------48395
18.0----------------2145---------------------50142
Actual measured velocities at 45F outside, at a distance of approx 5yds from chrony. Each loading was done with 4 rounds. Chrony being used was a Cabela's Beta Chrono.
Powder Load (gr) velocity (fps)
15.6----------------1870, 1998, 1877, 1880
16.0----------------1878, 1911, 1936, 1960
16.4----------------1943, error, 2060, 2007
16.8----------------2054, 2011, 2024, 2011
17.0----------------2096, 2115, 2085, 2061
17.2----------------2052, 2066, 2059, 2138
17.4----------------2048, 2128, error, error
17.6----------------2155, 2062, 2085, 2192
17.8----------------2107, 2120, error, 2110
18.0----------------2100, 2114, 2159, 2148
I saw no visible pressure signed in any of these loadings.
I ran the 17.8gr loads again @ 90F, and was very impressed. Average of 5 rounds was 2148fps and ES was less than 20fps through 5 rounds. ***(7/20/13)shot these rounds again today at 90F and these suckers are flying even faster at 2200fps. No pressure signs but dang, not sure why the increase.
Who is online
Users browsing this forum: Amazon [Bot], Bing [Bot] and 91 guests