I can not seem to get the speeds out of my 8" Noveske barrel
I am loading 125gr bullet using 19.5grs of H110 powder average = 2000 fps.
Is this what others are getting?
The barrel is new I have put 100 rds thru it
Shooting it from an M4.
Thanks for any help.
Need Loads for 8" barrel
Moderators: gds, bakerjw, renegade, bamachem
- 66427vette
- Silent But Deadly
- Posts: 216
- Joined: Tue Apr 14, 2009 3:14 pm
- Location: Nashvillle TN / Saint Louis MO
Re: Need Loads for 8" barrel
19. 3 grains h110 and 110 gr v-max @ 2.05oal = 2030 fps for me at 800 feet above sea level and 85 degrees.
- 66427vette
- Silent But Deadly
- Posts: 216
- Joined: Tue Apr 14, 2009 3:14 pm
- Location: Nashvillle TN / Saint Louis MO
Re: Need Loads for 8" barrel
Best load I have found so far . Consistently well under an inch at 100 yards.
- vz58
- Silent But Deadly
- Posts: 1437
- Joined: Fri Jul 29, 2011 11:57 am
- Location: Smack dab in the middle of NC
Re: Need Loads for 8" barrel
Do you factory crimp the v max? I ask because of reported set back issues and possibly projectiles coming out of the case.
Re: Need Loads for 8" barrel
Sounds about right. RSilvers wrote, "Remington Match 125 grain is 2010 fps in an AAC 9 inch, so the Nosler 125 should be about the same."Harley08 wrote:I can not seem to get the speeds out of my 8" Noveske barrel
I am loading 125gr bullet using 19.5grs of H110 powder average = 2000 fps.
Is this what others are getting?
The barrel is new I have put 100 rds thru it
Shooting it from an M4.
Thanks for any help.
From this thread, last post: viewtopic.php?f=151&t=78043&start=150
- 66427vette
- Silent But Deadly
- Posts: 216
- Joined: Tue Apr 14, 2009 3:14 pm
- Location: Nashvillle TN / Saint Louis MO
Re: Need Loads for 8" barrel
Yes, never had an issue with or with out . Pleanty of rounds down range both full and semiauto .vz58 wrote:Do you factory crimp the v max? I ask because of reported set back issues and possibly projectiles coming out of the case.
-
- Silent But Deadly
- Posts: 1215
- Joined: Mon Oct 17, 2011 8:09 am
- Location: NW Florida
Re: Need Loads for 8" barrel
125gr Nosler Ballistic Tip
Wolf KVB223M primers
LC military formed brass
no crimp
2.2" oal
9.5" Core15 bbl with 19.0gr H110 gives me 1995fps.
10.3" DCA bbl with 19.0gr H110 gives me 2077fps.
So your load with a half grain more powder, but a shorter barrel giving 2000fps sounds about right to me also.
Wolf KVB223M primers
LC military formed brass
no crimp
2.2" oal
9.5" Core15 bbl with 19.0gr H110 gives me 1995fps.
10.3" DCA bbl with 19.0gr H110 gives me 2077fps.
So your load with a half grain more powder, but a shorter barrel giving 2000fps sounds about right to me also.
- 66427vette
- Silent But Deadly
- Posts: 216
- Joined: Tue Apr 14, 2009 3:14 pm
- Location: Nashvillle TN / Saint Louis MO
Re: Need Loads for 8" barrel
If I could only find a decent m80 147 gr load for a 8inch Noveske I would be a happy man.
Re: Need Loads for 8" barrel
***********************66427vette wrote:If I could only find a decent m80 147 gr load for a 8inch Noveske I would be a happy man.
Here is what I got for m80 147 gr in my 8inch Noveske
19.0 grs of H 110 = 1932 fps average (5rds)
19.5 grs of H 110 = 1957 fps average (5rds)
Re: Need Loads for 8" barrel
Whoa. My Hornady manual shows a max of 16.2 grains of H110 for 300 Whisper. You might be safe going up another half grain for the BLK if you want to push it. I had a case head separation with 18 grains of W296 (basically H110) due to trying to get a faulty rifle to cycle. Be safe out there!Harley08 wrote:***********************66427vette wrote:If I could only find a decent m80 147 gr load for a 8inch Noveske I would be a happy man.
Here is what I got for m80 147 gr in my 8inch Noveske
19.0 grs of H 110 = 1932 fps average (5rds)
19.5 grs of H 110 = 1957 fps average (5rds)
Who is online
Users browsing this forum: No registered users and 228 guests