Berry's plated 150 gr bullet

Moderators: gds, bakerjw, renegade, bamachem

Posts: 12
Joined: Sat May 02, 2020 12:03 pm

Re: Berry's plated 150 gr bullet

Post by upsdood » Tue Jun 30, 2020 11:59 am

this was just the thread i was looking for... i will be forming cases from LC brass and using the berrys 30-30 round shoulders. whats the proper COAL for cfe blk.? according to hodgdon the COAL should be 2.235"but the berry's projectile is shorter than the hornady bullet listed.

edit: i will be using a AR platform that has m4 feedramps

BulletFlight for Android
New Member
Posts: 1
Joined: Sat Jun 06, 2020 6:06 pm

Re: Berry's plated 150 gr bullet

Post by psb » Fri Jul 03, 2020 1:13 pm

I can’t get these to feed. They always end up jammed across the chamber as if the tip of the bullet pops up too much.

What’s the secret?

FYI: the cases seem to be properly sized and drop straight into the chamber.

Posts: 31
Joined: Wed Apr 25, 2018 12:57 pm

Re: Berry's plated 150 gr bullet

Post by ironhead7544 » Thu Aug 06, 2020 5:27 pm

I recently loaded up some of the 30-30 RS bullets with a start load of WW296. COL was set at 1.950. Perfect feeding and function.

Also tried 1.900 and it worked with my AR just fine.

Post Reply